Dynamic Strain Aging of 316L Stainless Steel under Circular Loading

被引：0
|
作者：
Jin D. [1 ]
Zhang J.-Y. [1 ]
Li J.-H. [1 ]
机构：
[1] School of Energy and Power Engineering, Shenyang University of Chemical Technology, Shenyang, 110142, Liaoning
来源：
Binggong Xuebao/Acta Armamentarii | 2018年 / 39卷 / 03期
关键词：
316L stainless steel; Circular loading; Dislocation; Dynamic strain aging; Stress drop;
D O I：
10.3969/j.issn.1000-1093.2018.03.021
中图分类号：
学科分类号：
摘要：
Low cycle fatigue tests in different strain ranges were conducted for 316L stainless steel at 873 K under circular loading. The effects of number of cycles, strain range, and loaded state on the dynamic strain aging (DSA) are discussed. DSA is more obvious in the initial several cycles, followed by weak serrated yielding. The DSA is evident before failure in larger strain range, which can be attributed to the formation of the Snoek solute atom atmospheres. The results of the effect of strain range on DSA show that the stress drop value and the serrated yielding degree increase with the increase in strain range. The increase in serrated number in larger strain range is due to the dislocation multiplication. The thermomechanical analysis shows that the serrated yielding phenomenon is more significant due to the hold-up of vacancy diffusivity when the compression changes to unloading. Scanning electron microscope(SEM)results show that the material failures are attributed to fatigue, DSA, and oxidation in two strain ranges. © 2018Y, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码：584 / 589
页数：5
相关论文
共 19 条
  • [1] Lindgren L.E., Hao Q., Dan W., Improved and simplified dislocation density based plasticity model for AISI316L, Mechanics of Materials, 108, pp. 68-76, (2017)
  • [2] Zhou H.W., He Y.Z., Cui M., Et al., Dependence of dynamic strain ageing on strain amplitudes during the low-cycle fatigue of TP347H austenitic stainless steel at 550 ℃, International Journal of Fatigue, 56, pp. 1-7, (2013)
  • [3] Choudhary B.K., Christopher J., Stage-II tensile work hardening behaviour of type 316L(N) austenitic stainless steel, Materials Science & Engineering A, 651, pp. 486-489, (2016)
  • [4] Sha G.-Y., Yin M., Han E.-H., Et al., Microstructure and plastic instability of Mg-4.3Li-1.08Y-5.83Zn alloy, Acta Armamentarii, 38, 3, pp. 534-539, (2017)
  • [5] Yu D.J., Yu W.W., Chen G., Et al., Role of dynamic strain aging in the tensile property, cyclic deformation and fatigue behaveior of Z2CND18.12N stainless steel between 293 K and 723 K, Materials Science & Engineering A, 558, pp. 730-736, (2012)
  • [6] Kang G.-Z., Gao Q., Cai L.-X., Et al., Experimental study on the temperature-dependent cyclic deformation of SS304 stainless steel, Journal of Materials Engineering, 10, pp. 34-36, (2003)
  • [7] Hong S.G., Yoon S., Lee S.B., The effect of temperature on low-cycle fatigue behavior of prior cold worked 316L stainless steel, International Journal of Fatigue, 25, 9, pp. 1293-1300, (2003)
  • [8] Hong S.G., Lee S.B., Dynamic strain aging under tensile and LCF loading conditions, and their comparison in cold worked 316L stainless steel, Journal of Nuclear Materials, 328, 2, pp. 232-242, (2004)
  • [9] Han P.-C., Tian R., Shen Y.-Z., Et al., Dynamic strain aging in 316L austenitic stainless steel steel during tensile test at high temperature, Hot Work Technology, 41, 16, pp. 1-5, (2012)
  • [10] Christopher J., Choudhary B.K., On the assessment of tensile work hardening behaviour of type 316L(N) austeniteic stainless steel in the framework of θσ<sub>d</sub> vs.σ<sub>d</sub> using flow stress contribution from dislocations, International Journal of Pressure Vessels & Piping, 146, 10, pp. 151-160, (2016)
12