Evolution of microstructure and deformation mechanisms in a metastable Fe42Mn28Co10Cr15Si5 high entropy alloy: A combined in-situ synchrotron X-ray diffraction and EBSD analysis

被引:29
|
作者
Shen J. [1 ,7 ]
Zhang W. [2 ]
Lopes J.G. [1 ]
Pei Y. [2 ]
Zeng Z. [3 ]
Maawad E. [4 ]
Schell N. [4 ]
Baptista A.C. [7 ]
Mishra R.S. [5 ,6 ]
Oliveira J.P. [1 ,7 ]
机构
[1] UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade NOVA de Lisboa, Caparica
[2] Advanced Production Engineering, Engineering and Technology Institute Groningen, Faculty of Science and Engineering, University of Groningen, Nijenborgh 4
[3] School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Sichuan
[4] Institute of Materials Physics, Helmholtz-Zentrum Hereon, Max-Planck-Str. 1, Geesthacht
[5] Center for Friction Stir Processing, Department of Materials Science and Engineering, University of North Texas, Denton, 76207, TX
[6] Advanced Materials and Manufacturing Processes Institute, University of North Texas, Denton, 76207, TX
[7] CENIMAT/I3N, Department of Materials Science, NOVA School of Science and Technology, Universidade NOVA de Lisboa, Caparica
来源
Materials and Design | 2024年 / 238卷
关键词
Deformation mechanisms; High entropy alloys; Synchrotron X-ray diffraction; Transformation induced plasticity; Transformation twinning;
D O I
10.1016/j.matdes.2024.112662
中图分类号
学科分类号
摘要
In this work, a combination of in-situ high synchrotron X-ray diffraction and electron backscattered diffraction were used to systematically investigate the activation and evolution of the deformation mechanisms in an as-cast Fe42Mn28Co10Cr15Si5 metastable high entropy alloy deformed until fracture at room temperature. This work unveils the critical role of the dual-phase γ-f.c.c. / ε-h.c.p. microstructure on the deformation response of the alloy. The different deformation modes, i.e., slip, transformation induced plasticity (TRIP) and transformation induced twinning (TWIP), were seen to initiate at different loading stresses and then to overlap. Quantitative microstructural characterization, which included the evolution of the phase fraction, stress partitioning, dislocation density, c/a ratio and lattice strain for different planes, was performed to elucidate the role of each phase on the macroscopic mechanical response of the metastable high entropy alloy. Furthermore, the magnitude of the different strengthening contributions has been quantified for the first time. © 2024 The Author(s)
引用
收藏
相关论文
共 32 条
  • [1] Microstructure evolution and mechanical properties in a gas tungsten arc welded Fe42Mn28Co10Cr15Si5 metastable high entropy alloy
    Shen, Jiajia
    Agrawal, Priyanka
    Rodrigues, Tiago A.
    Lopes, J. G.
    Schell, N.
    He, Jingjing
    Zeng, Zhi
    Mishra, Rajiv S.
    Oliveira, J. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 867
  • [2] Friction stir processing of a high entropy alloy Fe42Co10Cr15Mn28Si5 with transformative characteristics: Microstructure and mechanical properties
    Sittiho, Anumat
    Bhattacharyya, Madhumanti
    Graves, Jadzia
    Nene, Saurabh S.
    Mishra, Rajiv S.
    Charit, Indrajit
    MATERIALS TODAY COMMUNICATIONS, 2021, 28
  • [3] Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction
    Polatidis, E.
    Shukla, S.
    Capek, J.
    Van Petegem, S.
    Casati, N.
    Mishra, R. S.
    MATERIALS TODAY COMMUNICATIONS, 2022, 30
  • [4] Complex deformation behavior of a partially recrystallized metastable medium-entropy alloy: In-situ synchrotron X-ray diffraction study
    Lee, Jae Heung
    Kwon, Hyeonseok
    Gu, Gang Hee
    Lee, Ji Yeong
    Jeong, Sang Guk
    Maawad, Emad
    Ha, Changwan
    Seol, Jae Bok
    Hong, Sun Ig
    Yi, Sangbong
    Kim, Hyoung Seop
    ACTA MATERIALIA, 2025, 286
  • [5] Time-resolved evolution of the deformation mechanisms in a TRIP/TWIP Fe50Mn30Co10Cr10 high entropy during tensile loading probed with synchrotron X-ray diffraction
    Lopes, J. G.
    Shen, J.
    Maawad, E.
    Agrawal, P.
    Schell, N.
    Mishra, R. S.
    Oliveira, J. P.
    INTERNATIONAL JOURNAL OF PLASTICITY, 2024, 179
  • [6] Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD
    Shen, Jiajia
    Lopes, J. G.
    Zeng, Zhi
    Choi, Yeon Taek
    Maawad, E.
    Schell, N.
    Kim, Hyoung Seop
    Mishra, Rajiv S.
    Oliveira, J. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 872
  • [7] Characterization of deformation substructure evolution in metastable Fe49Mn30Co10Cr10B1 interstitial high entropy alloy
    Tu, Jian
    Xu, Kang
    Liu, Yi
    Luo, Jin-ru
    Zhou, Zhi-ming
    Ding, Li-peng
    INTERMETALLICS, 2022, 144
  • [8] In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction
    Dias, P.
    Lopes, J. G.
    Curado, T.
    Maawad, E.
    Schell, N.
    Kim, H. S.
    Oliveira, J. P.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2024, 29 (03) : 213 - 219
  • [9] Deformation processes of additively manufactured interstitial-strengthened high entropy alloy: In-situ high-energy synchrotron X-ray diffraction and microstructural appraisal
    Zhang, Wei
    Shen, Jiajia
    Oliveira, J. P.
    Wang, Hui
    Feng, Shaochuan
    Schell, N.
    Kooi, Bart J.
    Pei, Yutao
    ADDITIVE MANUFACTURING, 2023, 76
  • [10] In situ high temperature X-ray diffraction analysis of microstructure evolution of nanocrystalline Co78Ni20 alloy
    Qiao, G.-Y. (frxiao@ysu.edu.cn), 1600, Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China (34):