Inverse method for calculating the friction coefficient between the section reduction part of the die and billet during extrusion process

被引：0
|
作者：
Lin, Zone-Ching
Lin, Ven-Huei
机构：
来源：
Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | 2005年 / 26卷 / 1-2期
关键词：
19;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：163 / 173
相关论文
共 19 条
  • [1] Modeling of double action extrusion-A novel extrusion process for friction characterization at the billet-die bearing interface
    Wang, L.
    He, Y.
    Zhang, Y.
    Cai, J.
    Zhou, J.
    Duszczyk, J.
    Katgerman, L.
    TRIBOLOGY INTERNATIONAL, 2010, 43 (11) : 2084 - 2091
  • [2] An investigation of the tribological interaction between die damage and billet deformation during MMC extrusion
    Nair, Fehmi
    Karamis, M. Baki
    TRIBOLOGY INTERNATIONAL, 2010, 43 (1-2) : 347 - 355
  • [3] Polygonal section extrusion from square billet through flat die - An application of upper-bound method
    Sahoo, S.K.
    Kar, P.K.
    2003, Institution of Engineers (India), Calcutta, 700 020, India (84):
  • [4] Friction coefficient between powder and die during compaction of ceramic powders
    Vandermeulen, W.
    Luyten, J.
    American Ceramic Society Bulletin, 2004, 83 (01):
  • [5] An Efficient Inverse Method for Determining the Material Parameters and Coefficient of Friction in Warm Rolling Process
    Yadav, V.
    Singh, A. K.
    Dixit, Uday Shanker
    ADVANCES IN MATERIAL FORMING AND JOINING, 2015, : 1 - 28
  • [6] Inverse estimation of thermal parameters and friction coefficient during warm flat rolling process
    Yadav, V.
    Singh, A. K.
    Dixit, U. S.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 96-97 : 182 - 198
  • [7] Effects of Different Die Metals on the Performance and Friction and Wear of Composite Materials during the Extrusion Process
    Liu, Hong
    Wang, Chuansheng
    POLYMERS, 2023, 15 (24)
  • [8] COEFFICIENT OF FRICTION BETWEEN METAL-POWDER AND DIE-WALL DURING COMPACTION
    TABATA, T
    MASAKI, S
    KAMATA, K
    POWDER METALLURGY INTERNATIONAL, 1981, 13 (04): : 179 - 182
  • [9] Determination of coefficient of friction on a drawing process based on the load required to pass a wire through the straight section of the die
    Porrello, Argel
    INGENIERIA UC, 2014, 21 (03): : 55 - 64
  • [10] AN INVERSE METHOD FOR DETERMINING THE INSTANTANEOUS DIFFUSION COEFFICIENT OF PUMPKIN CUBES DURING DRYING PROCESS
    Benseddik, A.
    Bensaha, H.
    Lalmi, D.
    Djilali, A. Benahmed
    Bennaceur, S.
    Allaf, K.
    LATIN AMERICAN APPLIED RESEARCH, 2023, 53 (03) : 189 - 194
12