Experimental on the Characteristics of "Sound-Vibration" in High Speed Train

被引:0
|
作者
Guo J. [1 ,2 ]
Ge J. [1 ]
Zhu L. [2 ]
机构
[1] School of Physics Science and Engineering, Tongji University, Shanghai
[2] CRRC Qingdao Sifang Co., Ltd, Qingdao
来源
Ge, Jianmin (jmge163@163.com) | 2018年 / Science Press卷 / 46期
关键词
High-speed train; Noise; Operational transfer path analysis (OTPA); Vibration;
D O I
10.11908/j.issn.0253-374x.2018.10.014
中图分类号
学科分类号
摘要
To analyze the main sources of low frequency noise in high-speed trains, the structural vibration and acoustic radiation theory was used to study the relationship between the characteristics of the sound field in the vehicle and the vibration of the interior plates. The experimental results show that the vibration of the interior plate and the coupling response characteristic of the sound field in the vehicle are universally applicable in the process of acoustic and structural sound propagation. This method is applied to analyze the noise characteristics of a high-speed train under different speed levels, open lines and tunnel conditions. The results show that, the higher the running speed of the train, the more significant the amplitude of the low frequency vibration of the interior panel increases, which leads to the peak of the low frequency noise in the car. Under 350km•h -1 operating conditions, the low frequency noise peak mainly originates from the floor vibration and the increase of the noise in the tunnel environment is due to the sidewalls and ceilings acoustic radiation. The contribution of each panel was quantified. Finally, the operational transfer path analysis (OTPA) method was used to quantitatively calculate the noise contribution of noise sources. The results show that the aerodynamic noise proportion is the largest, but the sum total of vibration excitation of 60%, especially at the peak frequency of 160 Hz, the contribution of the cooling fan vibration is the largest. © 2018, Editorial Department of Journal of Tongji University. All right reserved.
引用
收藏
页码:1421 / 1426and1432
相关论文
共 14 条
  • [1] Zhao S., Noise Reduction and Isolation (Last of Two Volumes), (1989)
  • [2] Guo J., Ge J., Sun Z., The mechanism of the noise transmission in the carbody of high-speed trains, Applied Mechanics and Materials, 724, (2015)
  • [3] Guo J., Ge J., Zhang H., Internal noise research and control measures of pantograph area of high-speed trains, Journal of Vibration Measurement & Diagnos, 37, 4, (2017)
  • [4] Yuan N., Shen A., Lu F., Et al., Operational transfer path analysis and noise sources contribution for China railway high-speed (CRH), Journal of Vibration and Shock, 33, 21, (2013)
  • [5] Leissa A.W., Vibration of Plates, (1969)
  • [6] Fahy F., Gardnio P., Sound and Structural Vibration(Second Edition), (2007)
  • [7] Zuo S., Wei H., Yan X., Et al., Radiation noise reduction of plate-like structure by structural optimization, Journal of Tongji University (Natural Science), 40, 1, (2012)
  • [8] Shuai R., Zhao Y., Lin J., Et al., Analysis of sound insulation performance and vibration mode characteristics of thin plate in low frequency region, Silicon Valley, 19, (2012)
  • [9] Shuai R., Zhao Y., Sun Z., Et al., Study on the structure sensitivity of the high-speed train body profile, Railway Locomotive & Car, 35, (2015)
  • [10] Du G., Zhu Z., Gong X., Acoustic Foundation, (2012)