Efficiency analysis of non ideal three-phase triple circuit

被引:0
|
作者
Wu F. [1 ]
Huo G. [1 ]
Peng S. [1 ]
Li H. [1 ]
机构
[1] School of Electronic and Information, Zhongyuan University of Technology, Zhengzhou
基金
中国国家自然科学基金;
关键词
Duty cycle; Efficiency; Non-ideal; Parameter calculation; Three-phase triple circuit;
D O I
10.19783/j.cnki.pspc.190286
中图分类号
学科分类号
摘要
It is inconvenient to analyze the actual efficiency of the traditional three-phase triple circuit. Based on the operation state of three-phase triple circuit in non-ideal state, the equivalent model of components in non-ideal state is deduced, and the equivalent circuit of non-ideal system is established. According to the equivalent circuit, the calculation formula of efficiency is deduced and the duty cycle and the ultimate influence of component parameters on efficiency are analyzed in the non-ideal state. It provides theoretical basis for system analysis and device selection and parameter calculation in circuit design. The SEMISEL loss simulation and Matlab circuit simulation are carried out, and the experimental prototype is built. The simulation and experimental results coincide with the derived models, which verifies that the derived model can well describe the influence of different factors on efficiency under non-ideal conditions. ©2020, Power System Protection and Control Press. All right reserved.
引用
收藏
页码:93 / 98
页数:5
相关论文
共 21 条
  • [1] Zhou J., He Z., Yang R., Modeling analysis and control research of DC/DC converter Buck circuit, Electrical Measurement & Instrumentation, 54, 9, pp. 95-100, (2017)
  • [2] Hegazy O., Baghdadi M.E., Mierlo J.V., Et al., Analysis and modeling of a bidirectional multiport DC/DC power converter for battery electric vehicle applications, 201416th European Conference on Power Electronics and Applications, (2014)
  • [3] Dai X., Llu K., Zhang Y., Analysis and control of DC voltage balance of H-bridge cascade harmonic generator, Guangdong Electric Power, 31, 3, pp. 73-79, (2018)
  • [4] Han S., Wu X., Miao J., Modeling of differential mode conducted interference coupling channel of a DC-DC converter, Power System Protection and Control, 46, 7, pp. 122-128, (2018)
  • [5] Zhang Y., Xiong J., Wang S., Et al., Research on a decoupling method of a two-stage inverter with hybrid Buck/Boost circuit, Power System Protection and Control, 46, 13, pp. 70-77, (2018)
  • [6] Ye J., Zhang F., The loss calculation of the MOSFET in synchronous buck circuit, Power Electronics, 41, 12, pp. 109-111, (2007)
  • [7] Ostman K.B., Jarvenhaara J.K., A rapid switch bridge selection method for fully integrated DCDC buck converters, IEEE Transactions on Power Electronics, 30, 8, pp. 4048-4051, (2015)
  • [8] Liu S., Mu L., Xu X., Et al., Research on power electronic devices failures' effect on microgrid operational reliability, Power System Protection and Control, 45, 24, pp. 63-70, (2017)
  • [9] Krismer F., Kolar J.W., Efficiency-optimized high current dual active bridge converter for automotive applications, IEEE Transactions on Industrial Electronics, 59, 7, pp. 2745-2760, (2012)
  • [10] Krismer F., Kolar J.W., Accurate power loss model derivation of a high-current dual active bridge converter for an automotive application, IEEE Transactions on Industrial Electronics, 57, 3, pp. 881-891, (2010)