Application and Research Status of Zn-Cu-Ti Alloy

被引：0
|
作者：
Ding X. [1 ]
Zhou S. [2 ]
Ye B. [1 ]
Jiang H. [1 ]
Wang Q. [1 ]
Ding W. [1 ]
机构：
[1] National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai
[2] Nantong L-S Light Alloy Co. Ltd, Nantong
来源：
Ye, Bing (bingye@sjtu.edu.cn) | 1600年 / Cailiao Daobaoshe/ Materials Review卷 / 31期
关键词：
Alloying elements; Corrosion resistance; Creep resistance; Zn-Cu-Ti alloy;
D O I：
10.11896/j.issn.1005-023X.2017.03.007
中图分类号：
学科分类号：
摘要：
The research progress on Zn alloy and the feasibility of replacing copper with zinc are introduced. The applications and advantages of Zn-based creep-resistant alloy, particularly the Zn-Cu-Ti alloy plate are mainly reviewed. This review summarizes the current status of the research and application of Zn-Cu-Ti alloy, reveals the role of Cu, Ti and other alloying elements, and discusses the effect of composition optimization and thermo-mechanical treatment on microstructure evolution and mechanical perfor-mance. Finally, the prospective applications of Zn-Cu-Ti alloy are concluded. © 2017, Materials Review Magazine. All right reserved.
引用
收藏
页码：38 / 43and51
页数：4313
相关论文
共 43 条
  • [1] Deng Y., Zhang D., Yan B., Et al., The phase structure analysis of high-iron sphalerite in high-temperature oxidation roas-ting, Mater Rev: Res, 29, 11, (2015)
  • [2] Kaya H., Cadirli E., Ulgen A., Investigation of the effect of composition on microhardness and determination of thermo-physical properties in the Zn-Cu alloys, Mater Des, 32, 2, (2011)
  • [3] Dong C., Zhang W., Zhang Y., Et al., Research on low-temperature impact toughness and anti-abrasive performance of aluminum zinc-based alloy, Mater Rev, 28, (2014)
  • [4] Purcek G., Saray O., Kucukomeroglu T., Et al., Effects of equal-channel angular extrusion on the mechanical and tri-biological properties of as-cast Zn-40Al-2Cu-2Si alloy, Mater Sci Eng A, 527, 15, (2010)
  • [5] Sun L., Researches on free-cutting deformation zinc alloys and their heat-treatment processes, (2011)
  • [6] Boyuka U., Kaya H., Cadirli E., Et al., Investigation of the effect of solidification processing parameters on microhardness and determination of thermo-physical properties in the Zn-Cu peritectic alloys, J Alloys Compd, 491, 1-2, (2010)
  • [7] Xiao L., Zhang X., Wang Y., Et al., Static recrystallization behavior of Zn-1.0Cu-0.2Ti alloy, Chin J Nonferrous Met, 21, 11, (2011)
  • [8] Geng Z., Element alloying and heat treatment effect on alloys SCC behaviors and creep mechanism, (2012)
  • [9] Wei H., Li W., Investigation of zinc-copper-titanium alloy strip and its application in clothing buttons, Shanghai Nonferrous Met, 36, 1, (2015)
  • [10] Miettinen J., Thermodynamic description of Cu-Mg-Ni and Cu-Mg-Zn systems, CALPHAD, 32, (2008)
12345