Abrasion of drill bit in process of drilling

被引：0
|
作者：
Zaretskij-Feoktistov, G.G.
机构：
来源：
Izvestiya Vysshikh Uchebnykh Zavedenii, Gornyi Zhurnal | 2002年 / 01期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：63 / 72
相关论文
共 50 条
  • [1] Vibration signal for identification of concrete drilling process and drill bit wear
    Lazarova, Edita
    Krul'akova, Maria
    Labas, Milan
    Ivanicova, Lucia
    Feriancikova, Katarina
    ENGINEERING FAILURE ANALYSIS, 2020, 108
  • [2] STRATAPAX DRILL BIT FOR GULF COAST DRILLING
    RADTKE, RP
    BRIDWELL, HC
    HANDSEL, RA
    MECHANICAL ENGINEERING, 1978, 100 (01) : 106 - 106
  • [3] STRATAPAX DRILL BIT FOR GULF COAST DRILLING
    RADTKE, RP
    BRIDWELL, HC
    HANDSEL, RA
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1978, 100 (02): : 234 - 235
  • [4] Drill bit benchmarking improves drilling performance
    Brown, LA
    Stoltz, DS
    Nims, DG
    OIL & GAS JOURNAL, 1997, 95 (22) : 139 - 143
  • [5] Influence of the drill bit tip geometry on the rotary drilling process performed with a hand-held hydraulic drill
    Boloz, Lukasz
    PRODUCTION ENGINEERING ARCHIVES, 2023, 29 (03) : 304 - 310
  • [6] Analytical dynamic model of the drill bit in rock drilling
    Key Laboratory of Hubei Province for Water Jet Theory and New Technology, Wuhan University, Wuhan 430072, China
    不详
    不详
    Yang, X.-F. (xfyang@whu.edu.cn), 1600, China Coal Society (37):
  • [7] INFLUENCE OF DRILL BIT DIAMETER ON DRILLING OF POLYURETHANE FOAMS
    Teixeira, Tiago A. S.
    Fernandes, Maria G.
    Azevedo, Lucas D.
    Fonseca, Elza M. M.
    Jorge, Renato N.
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 843 - 852
  • [8] Indirect prediction of drill bit wear in andesite drilling
    Ivanicova, Lucia
    Lazarova, Edita
    Krul'akova, Maria
    Labas, Milan
    Feriancikova, Katarina
    Behunova, Dominika
    2018 19TH INTERNATIONAL CARPATHIAN CONTROL CONFERENCE (ICCC), 2018, : 79 - 84
  • [9] Vibration Analysis of a Drill in the Drilling Process
    Hsu, Ming-Hung
    INTERNATIONAL JOURNAL FOR COMPUTATIONAL METHODS IN ENGINEERING SCIENCE & MECHANICS, 2005, 6 (04): : 261 - 270
  • [10] Dynamic characteristics of a drill in the drilling process
    Huang, BW
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (02) : 161 - 167
12345