Numerical simulation of high-speed spinning of thin-wall copper tube with axial micro-grooves

被引：2
|
作者：
Li Y. [1 ]
Xu Z.-C. [1 ]
Tang Y. [1 ]
Zeng Z.-X. [1 ]
机构：
[1] School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, Guangdong
来源：
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) | 2010年 / 38卷 / 01期
关键词：
Axial micro-grooved copper tube; Finite element analysis; Forming characteristic; Steel-ball spinning; Strain; Stress;
D O I：
10.3969/j.issn.1000-565X.2010.01.025
中图分类号：
学科分类号：
摘要：
In this paper, a simplified 1/4 rotational symmetrical model is built with the aid of finite element software MSC. Marc, and the high-speed steel-ball spinning process of thin-wall copper tube with axial micro-grooves is simulated. Afterwards, the forming characteristics, as well as the distributions of the equivalent stress and strain and of the residual stress, is analyzed. The results show that the metal rebound occurring in the forming process may result in forming gaps at the tooth root, that both the equivalent and the three-direction stress and strain arrange in layers in the axial direction, that the equivalent stress on the exterior wall surface, which is greater than the yield stress of the material, leads to the emergence of copper scale and fracture, that the equivalent stress and strain as well as the residual stress at the groove bottom are larger than those at the tooth tip and those on the exterior wall surface, and that larger residual stress may result in material embrittlement and surface cracks.
引用
收藏
页码：128 / 133
页数：5
相关论文
共 12 条
  • [1] Kim S.J., Seo J.K., Do K.H., Analytical and experimental investigation on the operational characteristics and the thermal optimization of a miniature heat pipe with a grooved wick structure, International Journal of Heat and Mass Transfer, 46, 11, pp. 2051-2063, (2003)
  • [2] Kuang W.-H., Xia Q.-X., Ruan F., Et al., Process analysis and experimental investigation of multi-pass offset spinning, Journal of South China University of Technology: Natural Science Edition, 34, 2, pp. 12-16, (2006)
  • [3] Zhang T., Liu Z.-C., Ma S.-C., Technologic research and numerical analysis of spinning of cylinders with inner ribs, Chinese Journal of Mechanical Engineering, 43, 4, pp. 109-118, (2007)
  • [4] Gao X.-C., Kang D.-C., Meng X.-F., Numerical simulation of the necking process of thin-walled tube by spinning, Journal of Plasticity Engineering, 6, 4, pp. 54-57, (1999)
  • [5] Lu X.-Y., Hou H.-L., Zhang S.-H., Et al., 3D elas-tic-plastic FEM simulation of TC4 alloy flow forming, Forming Technology, 6, pp. 38-41, (2005)
  • [6] Xia Q.X., Xie S.W., Huo Y.L., Et al., Numerical simulation and experimental research on the multi-pass neck-spinning of non-axisymmetric offset tube, Journal of Material Processing Technology, 206, pp. 500-508, (2008)
  • [7] Wu S.-J., Hwang Y.-M., Chang M.-H., A three-dimensional finite element analysis of the three-roll planetary mill, Journal of Materials Processing Technology, 123, pp. 336-345, (2002)
  • [8] Li Y., Tang Y., Xiao B.-W., Et al., Manufacturing of inner micro grooves of copper heat pipe via high-speed oil-filled spinning, Journal of South China University of Technology: Natural Science Edition, 35, 3, pp. 1-5, (2007)
  • [9] Xia Q.-X., Yang M.-H., Hu Y., Et al., Numerical simulation and experimentation cup-shaped thin-walled inner rectangular gear formed by spinning, Chinese Journal of Mechanical Engineering, 42, 12, pp. 192-196, (2006)
  • [10] Zhang G.-L., Zhang S.-H., Li B., Et al., Analysis on folding defects of inner grooved copper tubes during ball spin forming, Journal of Materials Processing Technology, 184, pp. 393-400, (2007)
12