Spatial positioning accuracy analysis of intelligent laser 3D projection

被引：0
|
作者：
Guo L. [1 ]
Li L. [1 ]
Hou M. [1 ]
Lin X. [1 ]
机构：
[1] Institute of Opto-Electronics Measurement & Control Technology, College of Opto-Electronic Engineering, Changchun University of Science and Technology, Changchun
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2018年 / 47卷 / 08期
关键词：
Intelligent laser 3D projection; Laser 3D projection; Projection accuracy precision; System calibration;
D O I：
10.3788/IRLA201847.0806006
中图分类号：
学科分类号：
摘要：
In order to solve the problem that laser 3D projection is unable to finish tasks with high precision, real-time and intelligent compensation positioning, a new method and accuracy analysis of intelligent laser 3D projection system based on laser tracking technology was proposed. Firstly, the mathematical model of the laser 3D projection system was established. Secondly, the laser 3D projection system was calibrated, and the coordinate system of the components was calibrated by using the datum points of the projection receiving component to complete the calibration of the intelligent 3D projection system. Finally, the model of intelligent laser 3D projection accuracy was established. Results of simulation showed that the middle part of projection area of laser 3D projector had the best accuracy. The projection point error of the projection surface caused by accuracy of the laser tracking measuring equipment was much smaller than the projection point error caused by the projector. The experiments results showed that the projection shape of the intelligent laser 3D projection system developed at the projection distance of 3 meters to 4 meters position accuracy could be better than 0.3 mm. Compared with the conventional laser projector, this system solved the problem that the large-size projection receiving part is unable to install the cooperation target in a large amount and the target reflex head and calibration tool were not needed in the follow-up work. The calibration process was omitted. When the projection system or the measured components moved or drifted, the intelligent recognition, solution, compensation for the relative displacement were completed to ensure accurate real-time projection to the correct location and greatly improved the integration, projection accuracy and positioning efficiency of the projection and positioning system. © 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
相关论文
共 8 条
  • [1] Chen G., Li H., Yu N., Application of laser projection technology in assembly connection, Aeronautical Manufacturing Technology, 495, pp. 20-22, (2015)
  • [2] Bordignon R.M., Rueb K., Wieczorek J., Laser projector for projecting an image onto a curvilinear surface, (1995)
  • [3] Qiang H., Reverse digitization in the laser projection and positioning system on the application of, (2006)
  • [4] Lin X., Li L., Cao G., Et al., Optimization design of iGPS high-precision pose measurement for large parts docking, Journal of Aeronautics, 36, 4, pp. 1299-1311, (2015)
  • [5] Zhang R., Jia H., Chen T., Et al., Attitude calculation of strap down inertial navigation system based on Quaternion Method, Optics and Precision Engineering, 16, 10, pp. 1963-1970, (2008)
  • [6] Li L., Zhao Y., Lin X., Application of weighted least squares in laser tracker transfer station, Optics and Precision Engineering, 23, 9, pp. 2570-2577, (2015)
  • [7] Zhang H., Lin J., Zhu J., Study on the precision of 3D coordinate transformation and its influencing factors, Optoelectronic Engineering, 38, 10, pp. 26-31, (2012)
  • [8] Zhou N., An Z., Li L., Et al., Design of airborne digital measurement network station, Optics and Precision Engineering, 20, 7, pp. 1485-1491, (2012)
1