Microstructure of C/C composites with different matrix carbon

被引:0
|
作者
Liu H. [1 ]
Li K.-Z. [2 ]
机构
[1] Research Center of Energy and Chemical Engineering, Yulin University, Yulin, 719000, Shaanxi
[2] School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an
来源
Liu, Hao (liuh0929@163.com) | 1600年 / Beijing Institute of Aeronautical Materials (BIAM)卷 / 44期
关键词
C/C composites; Matrix carbon; Microstructure;
D O I
10.11868/j.issn.1001-4381.2016.07.002
中图分类号
学科分类号
摘要
The microstructure of carbon/carbon(C/C) composites with different matrix carbon was studied by polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and XRD techniques respectively. PLM results indicate that the different matrix carbon exhibits different optical reactivity, and the average optical reactivity is gradually enhanced from normal pitch carbon, smooth laminar of pyrocarbon, rough laminar of pyrocarbon to mesophase pitch carbon; SEM results show that the normal pitch carbon is mainly of grapy structure, the pyrocarbon exhibits like-crinkle lamellar structure, while the mesophase pitch carbon exhibits lamellar banded structure with different shapes. Under HRTEM, the lattice fringes of the mesophase pitch carbon are arranged regularly, is a long range ordered crystal structure, and the preferred orientation is high. The degree of the graphite and the interlayer spacing of the material B (mesophase pitch-based C/C composites) are better than that of the material D (pyrocarbon-based C/C composites). © 2016, Journal of Materials Engineering. All right reserved.
引用
收藏
页码:7 / 12
页数:5
相关论文
共 20 条
  • [1] Bevilacqua M., Babutskyi A., Chrysanthou A., A review of the catalytic oxidation of carbon-carbon composite aircraft brakes, Carbon, 95, pp. 861-869, (2015)
  • [2] Sharma R., Deshpande V.V., Bhagat A.R., Et al., X-ray tomographical observations of cracks and voids in 3D carbon/carbon composites, Carbon, 60, 12, pp. 335-345, (2013)
  • [3] Daniel H., Mathias H., Et al., Novel method for determination of critical fiber length in short fiber carbon/carbon composites by double lap joint, Composites Part B: Engineering, 54, pp. 365-370, (2013)
  • [4] Ni X.Y., Li A.J., Zhong P., Et al., Effect of different high temperature treatment processes on biocompatibility of carbon/carbon composites, Journal of Materials Engineering, 6, pp. 62-67, (2014)
  • [5] Mohseni H., Scharf T.W., Role of atomic layer deposited solid lubricants in the sliding wear reduction of carbon-carbon composites at room and higher temperatures, Wear, 332, pp. 1303-1313, (2015)
  • [6] Hao M.Y., Luo R.Y., Xiang Q., Et al., Effects of fiber-type on the microstructure and mechanical properties of carbon/carbon composites, New Carbon Materials, 29, 16, pp. 444-453, (2014)
  • [7] He Y.G., Li K.Z., Wei J.F., Et al., Study on the microstructures and mechanical properties of 2D C/C composites, Journal of Inorganic Materials, 25, 2, pp. 173-176, (2010)
  • [8] Zaman W., Li K.Z., Li W., Et al., Flexural strength and thermal expansion of 4D carbon/carbon composites after flexural fatigue loading, New Carbon Materials, 29, 3, pp. 169-175, (2014)
  • [9] Liu Z.C., Zhang S.Y., Li H.J., Et al., Microstructures and mechanical behavior of C/C composites prepared by ICVI using n-propanol as precursor, Journal of Inorganic Materials, 26, 2, pp. 191-196, (2011)
  • [10] Fei Y.B., Lu J.H., Li H.J., Et al., Influence of heat treatment temperature on microstructure and thermal expansion properties of 2D carbon/carbon composites, Vacuum, 102, 8, pp. 51-53, (2014)