Multi-crack detection in pipes using ultrasonic guided wave based on phase trajectories

被引：0
|
作者：
Wen Y. [1 ,2 ]
Wu J. [1 ]
Lin R. [1 ]
Ma H. [1 ,2 ,3 ]
机构：
[1] Department of Civil Engineering, Dongguan University of Technology, Dongguan
[2] College of Science and Engineering, Jinan University, Guangzhou
[3] School of Civil Engineering, Qinghai University, Xining
来源：
Ma, Hongwei | 1600年 / Chinese Vibration Engineering Society卷 / 36期
关键词：
Double defects; Duffing chaotic system; Phase trajectory; Ultrasonic guided wave;
D O I：
10.13465/j.cnki.jvs.2017.23.017
中图分类号：
学科分类号：
摘要：
In multi-crack detection of ultrasonic guided wave, defects are not easy to recognize because the amplitudes of defect echoes are small and the waveforms are complex. Here, an approach for detection of steel pipes was proposed based on phase trajectories of a Duffing chaotic system. Firstly, the principle of using a chaotic system's phase trajectories to recognize ultrasonic guided wave signals was introduced, the parameters of the chaotic system were determined based on phase trajectories recognition combined with ultrasonic guided wave detection. Then, guided waves propagating in pipes were simulated via ANSYS, and the white Gaussian noises were added into the simulated signals to simulate the environmental noise. The test signals were obtained from a six-meter long steel pipe with different sizes of two-crack in it. The simulated and test guided wave signals were detected, respectively with the chosen Duffing chaotic system, they were compared. Finally, the defects' position was determined with the dichotomy method. The detected phase trajectories results showed that the proposed approach can be applied to effectively recognize defects of two-crack in pipes, and it improves the sensitivity of ultrasonic guided wave detection. © 2017, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码：114 / 122
页数：8
相关论文
共 17 条
  • [1] Rose J.L., Ultrasonic Guided wWaves in Solid Media, (2014)
  • [2] Cheng Z., Wang Z., Ma H., A brief review on damage detection in pipes using stress wave factor technique, Journal of Taiyuan University of Technology, 34, 4, pp. 426-431, (2003)
  • [3] Zhou Y., Wang Z., Ma H., Numerical simulation of crack detection in pipes using ultrasonic longitudinal guided-wave, Journal of North University of China (Natural Science Edition), 27, 3, pp. 258-262, (2006)
  • [4] Zhong K., Zhang W., Ma H., Experimental research of crack parameter identification in pipes using ultrasonic longitudinal guided-wave, Journal of Mechanical Strength, 34, 6, pp. 854-861, (2012)
  • [5] Lowe M.J.S., Alleyne D.N., Cawley P., Defect detection in pipes using guided waves, Ultrasonics, 36, 1, pp. 147-154, (1998)
  • [6] Aristegui C., Lowe M.J.S., Cawley P., Guided waves in fluid-filled pipes surrounded by different fluids, Ultrasonics, 39, 5, pp. 367-375, (2001)
  • [7] Zhang Z., Ma Y., Song Z., Et al., Impedance matching optimization of guided wave magnetostrictive sensor for large-diameter pipes, Nondestructive Testing, 37, 8, pp. 43-47, (2015)
  • [8] He C., Liu Z., Wu B., Application of transducers in pipes inspection using ultrasonic guided waves, Journal of Transducer Technology, 23, 11, pp. 5-8, (2004)
  • [9] Alleyne D., Cawley P., A two-dimensional Fourier transform method for the measurement of propagating multimode signals, The Journal of the Acoustical Society of America, 89, 3, pp. 1159-1168, (1991)
  • [10] Song Z., Wang Z., Ma H., Study on wavelet-based crack detection in pipes using ultrasonic longitudinal guided-wave, Chinese Journal of Solid Mechanics, 30, 4, pp. 368-375, (2009)
12