Experimental study on seismic performance of prefabricated concrete frame-cold-formed thin-walled steel composite wall structures

被引：0
|
作者：
Wang J. [1 ,2 ]
Hu P. [1 ]
Wang W. [1 ]
Pan G. [1 ]
Qiu D. [3 ]
机构：
[1] School of Civil Engineering, Hefei University of Technology, Hefei
[2] Anhui Collaborative Innovation Center of Advanced Steel Structure Technology and Industrialization, Hefei University of Technology, Hefei
[3] Hefei Guorui Integrated Construction Technology Limited Company, Hefei
来源：
Jianzhu Jiegou Xuebao/Journal of Building Structures | 2023年 / 44卷 / 04期
关键词：
CTSC wall; lateral stiffness; low cyclic load test; prefabricated concrete frame; seismic performance; wall-frame connection type;
D O I：
10.14006/j.jzjgxb.2021.0608
中图分类号：
学科分类号：
摘要：
One prefabricated concrete pure frame and two prefabricated concrete frames-cold-formed thin-walled steel composite (CTSC) walls were designed and tested under cyclic loadings to study their seismic behaviors and failure mechanism. The failure modes and load-displacement relationships, stiffness degradation, ductility performance, energy dissipation mechanism and strain variation characteristics of key positions were analyzed comprehensively. In the analysis above, the seismic performance of prefabricated concrete frames was studied in terms of the effect of embedded or external connections of CTSC walls. The results indicate that both the embedded and external connections between prefabricated concrete frame and CTSC wall panels can effectively guarantee the cooperative work of the prefabricated frame and the CTSC panels under earthquakes. Compared with the concrete pure frame, the bearing capacity of frame embedded CTSC wall panels and external CTSC wall panels is respectively increased by 28. 3% and 15. 0%, and the initial stiffness is improved by 38. 4% and 16. 8%, respectively. Based on the principle of equivalent tension-compression bar, a simplified formula of the prefabricated concrete frame embedded CTSC walls was proposed, which could calculate the lateral stiffness. And the accuracy of the calculation results was verified. © 2023 Science Press. All rights reserved.
引用
收藏
页码：247 / 256
页数：9
相关论文
共 23 条
  • [1] WANG Wanqian, WANG Jingfeng, ZHAO Peng, Et al., Axial compressive experiments and structural behaviour estimation of CFS composite walls sprayed with LPM, Journal of Building Engineering, 30, (2020)
  • [2] WANG Wanqian, WANG Jingfeng, GUO Lei, Et al., Cyclic performance tests and numerical analysis of prefabricated CFS shear walls filled with lightweight EPS mortars, Engineering Structures, 243, (2021)
  • [3] HEGYI Peter, DUNAI Laszlo, Experimental study on ultra-lightweight-concrete encased cold-formed steel structures: part I: stability behaviour of elements subjected to bending, Thin-Walled Structures, 101, pp. 75-84, (2016)
  • [4] HEGYI Peter, DUNAI Laszlo, Experimental study on ultra-lightweight-concrete encased cold-formed steel structures: part II: stability behaviour of elements subjected to compression, Thin-Walled Structures, 101, pp. 100-108, (2016)
  • [5] SONG Huihui, WANG Jingfeng, DING Zhaodong, Et al., Numerical analysis of axial compressive behavior of cold-formed thin-walled steel composite wall sprayed with light polymer material, Journal of Hefei University of Technology (Natural Science), 44, 4, pp. 514-519, (2021)
  • [6] LIU Bin, HAO Jiping, ZHAO Linwei, Et al., Experimental research on axial compression behavior of new-type of cold-formed thin-wall steel framing wall studs, Industrial Construction, 44, 2, pp. 113-117, (2014)
  • [7] LI Kelong, HAO Jiping, TIAN Limin, Et al., Research on compression-bending behavior of cold-formed thin-walled steel framing composite wall stud with sprayed lightweight mortar, Journal of Building Structures, 37, 11, pp. 97-105, (2016)
  • [8] LIU Bin, HAO Jiping, ZHONG Weihui, Et al., Experimental research on seismic behavior of cold-formed thin-wall steel framing walls with sprayed thermal insulation material, Journal of Building Structures, 35, 1, pp. 85-92, (2014)
  • [9] HAO Jiping, LIU Bin, SHAO Dayu, Et al., Test on shear resistance of cold-formed thin-walled X-shaped steel strap-braced framing walls with sprayed lightweight mortar, Journal of Building Structures, 35, 12, pp. 20-28, (2014)
  • [10] YUAN Quan, YANG Yi, LU Dongxin, Et al., Experimental study on shear resistance of light steel polystyrene foam concrete wall, Journal of Building Structures, 39, 11, pp. 104-111, (2018)
123