Lateral displacement of missile ejection separation with aircraft rolling

被引:0
|
作者
Liu H. [1 ]
Zhou J. [1 ]
Zhang S. [2 ]
Qi Z. [2 ]
机构
[1] School of Astronautics, Northwestern Polytechnical University, Xi'an
[2] Host Department, China Airborne Missile Academy, Luoyang
来源
关键词
Aircraft rolling; Ejection safety; Embedded ejection; Lateral displacement; Quasi-coordinates; Stiffness matching;
D O I
10.13465/j.cnki.jvs.2019.13.001
中图分类号
学科分类号
摘要
Here, lateral displacement of an air-to-air missile ejection separation with aircraft rolling was studied. Using Lagrange's equations in form of quasi-coordinates, a dynamic model for high-speed stretching process of an airborne ejection launcher was established. Dynamic characteristics of missile ejection separation with aircraft rolling were numerically simulated. The results showed that the missile ejection separation speed is normal, but the lateral deformation of the airborne ejection launcher is significant due to the action of Coriolis force to cause large later displacement of the missile tail, and threat the separation safety between aircraft and ejected missile. Due to constraints of weight and space as well as very short ejection actuation time, the traditional mechanism stiffness-enhancing method and the active control method were difficult to implement in engineering. For this difficult problem, a new idea to do a stiffness matching design for front and rear links of the ejection launcher was proposed. Simulations and tests showed that this method is effective and easy to realize in engineering; it provides a theoretical guidance for missile ejection under the condition of aircraft rolling. © 2019, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码:1 / 6
页数:5
相关论文
共 15 条
  • [1] Liu G., Xiao Z., Wang J., Et al., Numerical simulation of missile air-launching process under rail slideway constraints, Acta Aerndynamica Sinica, 33, 2, pp. 192-197, (2015)
  • [2] Wang L., Wang H., Yang M., Et al., Multi-body dynamics analysis method for vibration of flexible guide activated by moving missile, Acta Aeronautica et Astronautica Sinica, 35, 3, pp. 756-763, (2014)
  • [3] Liu H., Zhou J., Zhang S., Launch dynamic characteristics research of air-to-air missile under large maneuvering flight of steal aircraft, Journal of Vibration and Shock, 37, 2, pp. 24-29, (2018)
  • [4] Xue F., Jin X., Wang Y., Et al., Wind tunnel test technique on high speed weapon delivery from internal weapons bay, Acta Aeronautica et Astronautica Sinica, 38, 1, pp. 59-65, (2017)
  • [5] Wang X., Dynamical simulation of airborne eject launcher relating to the coupling of rigidity and flexibility, Journal of Ordnance Equipment Engineering, 35, 7, pp. 9-12, (2014)
  • [6] Zhang Q., Yan P., Li J., Comparison between external store separation and buried store separation of fighter, Journal of Beijing University of Aeronautics and Astronautics, 43, 6, pp. 1085-1097, (2017)
  • [7] Carter R., Lind R., Parametric modeling for store separation aerodynamics using system identification, AIAA Atmospheric Flight Mechanics Conference, (2013)
  • [8] Merrick J.D., Influence of mach number and dynamic pressure on cavity tones and freedrop trajectories: AFLTENY-14-M-36, (2014)
  • [9] Lijewski L.E., Suhs N.E., Time-accurate computational fluid dynamics approach to transonic store separation trajectory prediction, Journal of Aircraft, 31, 31, pp. 886-891, (2012)
  • [10] Perillo S.R., Challenges and emerging trends in store separation engineering: an air force seek eagle office perspective