Research and application of hard rock deep-hole advance blasting in comprehensive roadway excavation

被引：0

作者：

Wang H.-B. ^{[1
]}

Xu X. ^{[1
]}

Zong Q. ^{[1
]}

Xu S.-M. ^{[2
]}

Xu Y. ^{[1
]}

机构：

[1] School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan

[2] Huaibei Mining Group, Huaibei

来源：

| 2017年 / China Coal Society卷 / 42期

关键词：

Comprehensive roadway; Damage range; Deep hole advance blasting; Hard rock;

D O I：

10.13225/j.cnki.jccs.2016.0799

中图分类号：

学科分类号：

摘要：

Deep hole advance blasting technology is adopted for hard rock roadway excavated by comprehensive tunneling machine. It can increase the fracture and damage scope of rock mass, and make the comprehensive tunneling machine cutting easier. Take Taoyuan Coal Mine of Huaibei Mining Group as an example, the theoretical analysis and numerical simulation on the blasting crack and damage range of original rock stress were conducted, on the basis of this, the parameters of large diameter deep hole advance blasting was designed and tested. The research results show that the range of Von Mises stress more than 177 MPa was 0.424 m around blasting hole, the hole diameter was 75 mm, the charge diameter was 63 mm, and a fracture zone was formatted. Its damage range was from 0.424 m to 2.3 m. After blasting, comprehensive machine excavation speed increased by 40% to 50% and cutter consumption was reduced by 52.4%. Blasting vibration measurement and analysis show that blasting vibration energy was focused on the frequency range from 50 Hz to 160 Hz, and there was no damage to the roadway surrounding rock and supporting structure. © 2017, Editorial Office of Journal of China Coal Society. All right reserved.

引用

页码：908 / 915

页数：7

共 14 条

[1] Wang H., The 40 years developmental review of the fully mechanized mine roadway heading technology in China, Journal of China Coal Society, 35, 11, pp. 1815-1820, (2010)
[2] Zhu H., Wu Z., Li G., Et al., Study on wear failures of mining machinery, Journal of China Coal Society, 31, 3, pp. 380-385, (2006)
[3] Wang H., Zong Q., Dong J., Study on application of standing pre-cracking blasting technology of hard rock to fully mechanized heading of mine rock roadway, Coal Engineering, 11, (2012)
[4] Gong M., Zhang F., Wen B., Et al., Numerical simulation and application on blasting to improve gas drainage rate in floor rock of coal roadway, Journal of China Coal Society, 37, 6, pp. 972-977, (2012)
[5] Guo D., Shang D., Lu P., Et al., Experimental research of deep-hole cumulative blasting in hard roof weakening, Journal of China Coal Society, 38, 7, pp. 1149-1153, (2013)
[6] Gao K., Liu Z., Liu J., Et al., Application of deep borehole blasting to gob-side entry retaining forced roof caving in hard and compound roof deepwell, Chinese Journal of Rock Mechanics and Engineering, 32, 8, pp. 1588-1594, (2013)
[7] Wei M., Wang E., Liu X., Et al., Numerical simulation of rockburst prevention effectby blasting pressure relief in deep coal seam, Rock and Soil Mechanics, 32, 8, pp. 2539-2544, (2011)
[8] Yang X., Wang S., Meso-mechanism of damage and fracture on rock blasting, Explosion and Shock Waves, 20, 3, pp. 247-252, (2000)
[9] Yan P., Lu W., Chen M., Et al., Study of the damage characteristics of surrounding rocks for tunnels constructed using TBM and drilling and blasting, China Civil Engineering Journal, 42, 11, pp. 121-128, (2009)
[10] Bai Y., Zhu W., Wei C., Et al., Numerical simulation on two-hole blasting under different in-situ stress conditions, Rock and Soil Mechanics, 34, pp. 466-472, (2013)

← 1 2 →