Harvesting sustainable energy from saltwater: Part II-effect of electrode geometry

被引：0

作者：

Bani, N.A. ^{[1
]}

Mad Kaidi, H. ^{[1
]}

Muhtazaruddin, M.N. ^{[1
]}

Mohamed Rashidi, A.H. ^{[2
]}

Hassan, M.Z. ^{[1
]}

Sarip, S. ^{[1
]}

Saleh, S. ^{[1
]}

Muhammad Sukki, F. ^{[3
]}

Abu Bakar, S.H. ^{[4
]}

Mas'ud, A.A. ^{[5
]}

Ardilla-Rey, J. ^{[6
]}

机构：

[1] Razak Faculty of Technology and Informatics, Universiti Teknologi Malaysia Kuala Lumpur, Jalan Sultan Yahya Petra, Kuala Lumpur,54100, Malaysia

[2] Coastal and Oceanography Research Centre, National Hydraulic Research Institute of Malaysia, Seri Kembangan, Selangor, Malaysia

[3] School of Engineering, Robert Gordon University, Aberdeen,AB10 7GJ, United Kingdom

[4] British Malaysian Institute, Universiti Kuala Lumpur, Gombak, Selangor,53100, Malaysia

[5] Department of Electrical and Electronic Engineering Technology, Jubail Industrial College, Jubail,31961, Saudi Arabia

[6] Department of Electrical Engineering, Universidad Técnica Federico, Santa María, Chile

来源：

Test Engineering and Management | 2019年 / 81卷 / 11-12期

关键词：

Electrodes;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Green energy or renewable energy is a widely and commonly used terminology when depicting the energy generated from natural resources such as solar, wind, geothermal, biomass and hydropower. One energy resource, in particular, has yet to unleash its potential is the saltwater energy. When salt is dissolved in the water, the ionic compounds of sodium and chlorine are separated, thus allowing the free movement of ions in the solution. This study is the second part of the development phase in producing a low cost saltwater lamp for rural and remote communities in Malaysia. This study specifically focuses on the dimension and geometry of the aluminium electrodes as well as the types of carbon electrodes used. This study is important in determining the most cost effective electrodes to be used in the saltwater lamp. © 2019 Mattingley Publishing. All rights reserved.

引用

页码：5709 / 5717

共 50 条

[1] STRESS CONCENTRATION FACTORS FOR PRESSURIZED ELLIPTIC CROSSBORES IN BLOCKS-PART II-EFFECT OF BLOCK GEOMETRY
Badr, E. A.
EXPERIMENTAL TECHNIQUES, 2010, 34 (04) : 55 - 61
[2] The Effect of Variables on Laboratory Termite Testing: Part II-Effect of Grain Orientation of Test Blocks
Lindsey, G. B.
Amburgey, T. L.
Barnes, H. M.
FOREST PRODUCTS JOURNAL, 2020, 70 (04) : 459 - 461
[3] Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants: Part II-Effect of Environment and Outlook
Sadeghi, Esmaeil
Markocsan, Nicolaie
Joshi, Shrikant
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, 28 (08) : 1789 - 1850
[4] Thermally Activated Al(OH)3 Part II-Effect of Different Thermal Treatments
Vasile, Bogdan Stefan
Dobra, Gheorghe
Iliev, Sorin
Cotet, Lucian
Neacsu, Ionela Andreea
Surdu, Vasile Adrian
Nicoara, Adrian Ionut
Boiangiu, Alina
Filipescu, Laurentiu
CERAMICS-SWITZERLAND, 2021, 4 (04): : 564 - 575
[5] Lightweight, conductive hollow fibers from nature as sustainable electrode materials for microbial energy harvesting
Zhu, Hongli
Wang, Heming
Li, Yuanyuan
Bao, Wenzhong
Fang, Zhiqiang
Preston, Colin
Vaaland, Oeyvind
Ren, Zhiyong
Hu, Liangbing
NANO ENERGY, 2014, 10 : 268 - 276
[6] Compression behaviour of hand-tufted carpets: Part II-Effect of cyclic compressive load
Choubisa, Bhavna
Sinha, S. K.
Chattopadhayay, R.
INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2020, 45 (03) : 305 - 311
[7] Channel deformation of bilayer material using tool rollers: part II-effect of layer thickness on springback
Nikhare, Chetan P.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 : 1820 - 1841
[8] Laboratory Flume Experiments on the Formation of Spanwise Large Wood Accumulations: Part II-Effect on local scour
Schalko, I.
Lageder, C.
Schmocker, L.
Weitbrecht, V.
Boes, R. M.
WATER RESOURCES RESEARCH, 2019, 55 (06) : 4871 - 4885
[9] Wireless Communications Powered by Energy Harvesting and Wireless Energy Transfer, Part II
Ulukus, Sennur
Erkip, Elza
Grover, Pulkit
Huang, Kaibin
Simeone, Osvaldo
Yener, Aylin
Zorzi, Michele
IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, 2015, 33 (08) : 1477 - 1479
[10] Effect of Strain Nodes and Electrode Configuration on Piezoelectric Energy Harvesting From Cantilevered Beams
Erturk, A.
Tarazaga, P. A.
Farmer, J. R.
Inman, D. J.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2009, 131 (01): : 0110101 - 01101011

← 1 2 3 4 5 →