Study on Dynamic Characteristics and Failure Mechanism of Wet Dual Clutch Transmission

被引：0
|
作者：
Li B. [1 ]
Meng D. [1 ]
Zhang L. [1 ]
Xu J. [1 ]
机构：
[1] School of Automotive Studies, Tongji University, Shanghai
来源：
Tongji Daxue Xuebao/Journal of Tongji University | 2022年 / 50卷
关键词：
dynamic characteristics; failure mechanism; system resonance; twisting vibration; wet dual clutch transmission;
D O I：
10.11908/j.issn.0253-374x.23705
中图分类号：
学科分类号：
摘要：
The failure of a 6-speed wet dual clutch transmission is analyzed，and it is found that the fracture of resin slider in torsional shock absorber is the main reason for the vehicle losing power. In order to analyze the failure condition and failure mechanism，vehicle starting and full throttle acceleration tests were carried out. It was found that the maximum impact moment of the torsional shock absorber was 928N·m when the engine temperature was -2~5℃ ，and most of the maximum impact moment occurred in gear shifting and full throttle acceleration in low gear condition. To explore the failure mechanism，a torsional vibration mechanical model of drive system was established， and the inherent characteristics were analyzed. The results show that the second natural frequency（11.51Hz）of the first gear unengaged state of the system is close to the peak frequency（8-13Hz）of the starting condition in the test，and the resonance slider is easy to be damaged. The results show that the large instantaneous impact mo ment and the system resonance during the starting process are the main reasons for the fatigue failure of the slider. © 2022 Science Press. All rights reserved.
引用
收藏
页码：16 / 25
页数：9
相关论文
共 19 条
  • [1] CHEN Xiaomin, Research on dynamics and vibration characteristics of chain transmission system of double clutch automatic transmission ［D］, (2021)
  • [2] GANESH K C, DHANASEKARAN K，, SARAVANAN P，, Et al., Failure analysis of multi plate wet-clutch used in off-highway transmission［J］, Engineering Failure Analysis, 127, (2021)
  • [3] Apparatus for continuous wear measurements during wet clutch durability tests［J］, Wear, 288, (2012)
  • [4] ZOU Tingting, Thermal structural coupling analysis of wet clutch［D］, (2018)
  • [5] WANG Xiaoli, Rui MU, WANG Caihong, Fracture failure analysis of clutch shaft sleeve plate［J］, Mechanical strength, 40, 3, (2018)
  • [6] Yongjun LIU, ZU Huicheng, Case analysis of clutch piston fracture failure［J］, Electronic technology, 49, 12, (2020)
  • [7] CHEN Yao, Research on temperature characteristics and thermal failure of wet multi plate clutch［D］, (2019)
  • [8] TINKIR M., Optimization of torsional vibration damper of cranktrain system using a hybrid damping approach ［J］, Engineering Science and Technology：an International Journal, 24, 4, (2021)
  • [9] KUMAR R, KUMAR D, Et al., Dynamic modeling and analysis of a hydro-mechanical power transmission system［J］, Materials Today, 3, (2022)
  • [10] Antai LI, Datong QIN, Adaptive model predictive control of dual clutch transmission shift based on dynamic friction coefficient estimation［J］, Mechanism and Machine Theory, 173
12