Research on Laser Cladding Forming of Close-Packed Multivariant Twisty Thin-Wall Parts

被引：0

作者：

Wang C. ^{[1
]}

Shi S. ^{[1
]}

Fang Q. ^{[1
]}

Fu G. ^{[1
]}

Lu L. ^{[1
]}

Zhou L. ^{[1
]}

机构：

[1] School of Mechanical and Electric Engineering, Soochow University, Suzhou, 215021, Jiangsu

来源：

Shi, Shihong (shishihong@stu.suda.edu.cn) | 1600年 / Science Press卷 / 44期

关键词：

Close-packed multivariant twisty thin-wall parts; Discrete layers; Inside-laser powder feeding; Laser cladding; Laser technique;

D O I：

10.3788/CJL201744.0602004

中图分类号：

学科分类号：

摘要：

Based on the inside-laser powder feeding technology, the forming research of close-packed multivariant twisty thin-wall parts is performed. The spatial motion trajectory and the pose of the cladding nozzle are obtained. According to the analytic relationship between the cladding layer section and the process parameters as well as the single-pass experiment, the height process model is set up and the forming of binary twisty thin-wall parts is performed. The close-packed multivariant twisty thin-wall parts are accumulated by the intermittent cladding process. The testing results show that the surface of formed parts is smooth, the minimum clearance among blade units is 6.5 mm, and the thickness of blades is mainly stable around 2.7 mm. The distributions of the microstructure and microhardness are relatively homogeneous. © 2017, Chinese Lasers Press. All right reserved.

引用

共 14 条

[1] Zhu Y., Xu J., Zhao J., Study on the shaping law and test of electrochemical contour evolution machining for integral turbine with big-twisted blades, China Mechanical Engineering, 17, 17, pp. 1778-1783, (2006)
[2] Wei J., Kuang N., Ceramic shell technique for large complex thin wall investment structural castings, Foundry Technology, 37, 3, pp. 488-491, (2016)
[3] Kolluru K., Axinte D., Coupled interaction of dynamic responses of tool and workpiece in thin wall milling, Journal of Materials Processing Technology, 213, 9, pp. 1565-1574, (2013)
[4] Shang X., Liu W., Wang W., Et al., Slope limit of part made in metal powder laser shaping, Journal of Mechanical Engineering, 43, 8, pp. 97-100, (2007)
[5] Wang X., Wang Y., Jiang H., Et al., Laser cladding forming of round thin-walled parts with slope angle, Chinese J Lasers, 41, 1, (2014)
[6] Yu L., Shi S., Di K., Research on laser cladding inclined wall accumulation based on the internal laser coaxial-powder feeding technology, Laser & Infrared, 39, 3, pp. 264-266, (2009)
[7] Fu G., Liu Y., Shi S., Et al., Control of process parameters for accumulate screwy thin-walled part by laser cladding with coaxial inside-beam powder feeding, Electromachining and Mould, 2, pp. 43-46, (2014)
[8] Keist J.S., Palmer T.A., Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition, Materials & Design, 106, pp. 482-494, (2016)
[9] Abele E., Stoffregen H.A., Kniepkamp M., Et al., Selective laser melting for manufacturing of thin-walled porous elements, Journal of Materials Processing Technology, 215, pp. 114-122, (2015)
[10] Dwivedi R., Zekovic S., Kovacevic R., A novel approach to fabricate uni-directional and branching slender structures using laser-based direct metal deposition, International Journal of Machine Tools & Manufacture, 47, pp. 1246-1256, (2007)

← 1 2 →