Effect of Splitter Plate Length on Hydrodynamic Performance Around Cylinder at High Reynolds Numbers

被引：0
|
作者：
Gao Y. [1 ,2 ]
Wang M. [1 ]
Zong Z. [3 ]
Zou L. [3 ]
Peng G. [1 ]
机构：
[1] State Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Southwest Petroleum University, Chengdu
[2] Department of Mechanical Engineering, The University of Tokyo, Tokyo
[3] School of Naval Architecture, Dalian University of Technology, Dalian, 116024, Liaoning
来源：
| 2017年 / Shanghai Jiaotong University卷 / 51期
关键词：
Circular cylinder; Flow characteristics; High Reynolds numbers; Large eddy simulation; Splitter plate;
D O I：
10.16183/j.cnki.jsjtu.2017.04.019
中图分类号：
学科分类号：
摘要：
Influence of splitter plate length on characteristics of flow past a circular cylinder at high Reynolds numbers is investigated using large eddy simulation (LES). Lift coefficients, drag coefficients, Strouhal numbers and vortex shedding patterns of different splitter plate lengths are compared and analyzed. The results of analysis show: based on the time histories of lift coefficients and drag coefficients, the splitter plate lengths could be divided into three regimes, which are the stable regime I (when the splitter plate length L=0D, D is the diameter of the circular cylinder), the unstable regime II (L=0.5D-1.0D), and the stable again regime III (L=1.5D-8.0D). When splitter plate length changes from regime I to regime II, there is a sudden drop of Strouhal number. When splitter plate length changes from regime II to regime III, there is a sudden increase of Strouhal number. With the increase of splitter plate length, the vortex shedding pattern of flow field changes from 2S to 2P. © 2017, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码：504 / 512
页数：8
相关论文
共 17 条
  • [1] Gao Y., Fu S., Et al., Fatigue damage analysis of vortex-induced vibration of a long, flexible riser, Shanghai Jiao Tong University, 50, 8, pp. 1270-1277, (2016)
  • [2] Choi H., Jeon W.P., Kim J., Control of flow over a bluff body, Annual Review of Fluid Mechanics, 40, pp. 113-139, (2008)
  • [3] Gao Y., Fu S., Song L., Experimental investigation on the suppression device of VIV of a flexible riser, Journal of Vibration and Shock, 33, 14, pp. 77-83, (2014)
  • [4] Ren T., Gao Y., Fu S., Et al., Experimental investigation on the suppression device ofVIV of a flexible riser in sheared currents, Journal of Ship Mechanics, 20, 4, pp. 497-507, (2016)
  • [5] Zhu H.J., Yao J., Numerical evaluation of passive control of VIV by small control rods, Applied Ocean Research, 51, pp. 93-116, (2015)
  • [6] Tan B., Wang J., Gu F., Et al., Numerical simulation of VIV Control on marine riser with splitter plates, Journal of Hydrodinamics, 24, 1, pp. 43-48, (2009)
  • [7] Sudhakar Y., Vengadesan S., Vortex shedding characteristics of a circular cylinder with an oscillating wake splitter plate, Computers & Fluids, 53, pp. 40-52, (2012)
  • [8] Bao Y., Tao J., The passive control of wake flow behind a circular cylinder by parallel dual plates, Journal of Fluids and Structures, 37, pp. 201-219, (2013)
  • [9] Wu J., Shu C., Zhao N., Numerical study of flow control via the interaction between a circular cylinder and a flexible plate, Journal of Fluids and Structures, 49, pp. 594-613, (2014)
  • [10] Zhu R., Zheng T., Li Z., Numerical simulation on the wake field of marine riser fitted with a splitter plate, Journal of Ship Mechanics, 18, 7, pp. 746-753, (2014)
12