Modeling of softening and hardening behaviors of the shear strength of rock joints

被引：0
|
作者：
Wang S. [1 ]
Guo M. [1 ]
Sun G. [1 ]
Ke C. [2 ]
Li Z. [2 ]
机构：
[1] State Key laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, Hubei
[2] School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan, 430068, Hubei
来源：
| 2018年 / Academia Sinica卷 / 37期
基金：
中国国家自然科学基金;
关键词：
Constant normal stiffness(CNS); Rock joints; Rock mechanics; Strength hardening; Strength softening;
D O I：
10.13722/j.cnki.jrme.2018.0704
中图分类号：
学科分类号：
摘要：
In shear tests of rock joints, constant normal load(CNL), constant normal displacement and constant normal stiffness(CNS) conditions are used. Compared to the first two conditions, Shear stress-displacement curves display more complicated in the case of CNS condition. Aiming to evaluate shear behavior of rock joints under CNS, an extension was made to model strength softening and strength hardening processes in a unified form on the basis of the approach which takes strain softening process as a series of stress drop and plastic flow, and the corresponding formulation was presented. Shear behavior was modeled under various CNS conditions. The results show that shear stress-displacement curve displays in strength softening mode when the normal stiffness is small but that strength hardening mode appears while the normal stiffness increases. The shear stress-shear displacement curves, normal displacement-shear displacement curves and normal stress-shear displacement curves were compared with test results and good agreements between them were observed, which indicates that the presented procedure is reliable. Furthermore, the shear behavior of rock joints was studied under different combinations of the initial normal stress and the normal stiffness. © 2018, Science Press. All right reserved.
引用
收藏
页码：2742 / 2750
页数：8
相关论文
共 28 条
  • [1] Liu X., Experimental study on stiffness characteristics of rockmass structural face in TGP, Journal of Yangtze River Scientific Research Institute, 15, 3, pp. 25-27, (1998)
  • [2] Sun Z., Study on mechanical characteristics of rock mass discontinuities, Chinese Journal of Rock Mechanics and Engineering, 6, 4, pp. 287-300, (1987)
  • [3] Liu B., Li H., Zhu X., Experimental simulation study of strength degradation of rock joints under cyclic shear, Chinese Journal of Rock Mechanics and Engineering, 30, 10, pp. 2033-2039, (2011)
  • [4] Jing L., Stephansson O., Nordlund E., Study of rock joints under cyclic loading condition, Rock Mechanics Rock Engineering, 26, 3, pp. 215-232, (1993)
  • [5] Brady B.H.G., Brown E.T., Rock Mechanics for Underground Mining, pp. 122-123, (2004)
  • [6] Indraratna B., Haque A., Experimental study of shear behavior of rock joints under constant normal stiffness conditions, International Journal of Rock Mechanics and Mining Sciences, 34, 141, pp. 1-14, (1997)
  • [7] Jiang Y., Xiao J., Tanabashi Y., Et al., Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition, International Journal of Rock Mechanics and Mining Sciences, 41, 2, pp. 275-286, (2004)
  • [8] Indraratna B., Haque A., Aziz N., Laboratory modeling of shear behavior of soft joints under constant normal stiffness conditions, Geotechnical and Geological Engineering, 16, pp. 17-44, (1998)
  • [9] Johnston I.W., Lam T.S.K., Williams A.F., Constant normal stiffness direct shear testing for socketed pile design in weak rock, Geotechnique, 37, 1, pp. 83-89, (1987)
  • [10] Son B.K., Shear behavior of rock joint under constant normal stiffness condition, (2005)
123