3D model applied to 4340 spline heated by scanning induction

被引：0
|
作者：
Barka, N. [1 ]
El Ouafi, A. [1 ]
Chebak, A. [1 ]
机构：
[1] Mathematics, Computer Science and Engineering Department, University of Quebec at Rimouski, 300 Allée des Ursulines, Rimouski, QC G5L 3A1, Canada
来源：
Manufacturing Letters | 2014年 / 2卷 / 03期
关键词：
Low carbon steel - Hardness - Couplings - Residual stresses - Splines;
D O I：
10.1016/j.mfglet.2014.05.001
中图分类号：
学科分类号：
摘要：
Induction heating is capable of providing martensitic hard surfaces with compressive residual stresses when applied to mechanical components. However, the effects of machine parameters on the hardness profile are not known with precision. This paper proposes an analysis of hardness profile versus the imposed current density and scanning velocity for 4340 splines using simulation. The first step consists of developing a 3D model based on coupling magnetic and thermal fields and taking the material properties into account. The second phase permits the analysis of temperatures depending on the machine parameters. Finally, the sensitivity of hardness profile was investigated. © 2014 Society of Manufacturing Engineers (SME).
引用
收藏
页码：79 / 81
相关论文
共 50 条
  • [1] 3D orthogonal spline moments and 3D model retrieval
    Liu, Yujie
    Zhang, Xiaodong
    Li, Hua
    Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, 2009, 21 (07): : 968 - 972
  • [2] 3D laser scanning applied to diagnosis in vaults
    Tirado, A.
    Ortiz, R.
    Ortiz, P.
    CONSERVING CULTURAL HERITAGE, 2018, : 145 - 147
  • [3] Finding the heated volume in deep hyperthermia with a 3D scanning phantom
    Marder, D.
    van Stam, G.
    Lomax, N.
    Timm, O.
    Lutters, G.
    STRAHLENTHERAPIE UND ONKOLOGIE, 2017, 193 (10) : 871 - 871
  • [4] Study of the machine parameters effects on the case depths of 4340 spur gear heated by induction—2D model
    Noureddine Barka
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 1173 - 1181
  • [5] 3D modeling of different areas of China based on the 3D Surface Spline model
    Feng Yan
    Huang Ya
    Li Yijun
    Zhang Jinyuan
    Liu Shuang
    APPLIED GEOPHYSICS, 2024, 21 (01) : 31 - 40
  • [6] 3D modeling of different areas of China based on the 3D Surface Spline model
    Yan Feng
    Ya Huang
    Yijun Li
    Jinyuan Zhang
    Shuang Liu
    Applied Geophysics, 2024, 21 : 31 - 40
  • [7] Study of the machine parameters effects on the case depths of 4340 spur gear heated by induction-2D model
    Barka, Noureddine
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 1173 - 1181
  • [8] Low-Cost 3D Scanning Applied to Packaging Design
    Cordeiro, Joe Wallace
    Gomes Ferreira, Marcelo Gitirana
    Braviano, Gilson
    ICGG 2022 - PROCEEDINGS OF THE 20TH INTERNATIONAL CONFERENCE ON GEOMETRY AND GRAPHICS, 2023, 146 : 406 - 417
  • [9] Numerical simulation of 3D electromagnetic–thermal phenomena in an induction heated slab
    He-ping Liu
    Xian-hui Wang
    Liang-ying Si
    Jian Gong
    Journal of Iron and Steel Research International, 2020, 27 : 420 - 432
  • [10] A 3D pyramid spline element
    Juan Chen
    Chong-Jun Li
    Wan-Ji Chen
    Acta Mechanica Sinica, 2011, 27 : 986 - 993
12345