Low noise optimization design of loader cab based on panel contribution analysis

被引：0
|
作者：
Zhang J. [1 ]
Li Z. [1 ]
Bi F. [1 ]
Wang J. [1 ]
He W. [1 ]
Zhu C. [1 ]
Tian Y. [1 ]
机构：
[1] State Key Laboratory of Engines Combustion, Tianjin University, Tianjin
来源：
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2016年 / 36卷 / 03期
关键词：
Acoustic sensitivity; Low noise; Panel contribution; Structural optimization; Vibro-acoustic coupling;
D O I：
10.16450/j.cnki.issn.1004-6801.2016.03.026
中图分类号：
学科分类号：
摘要：
The loader is a widely used type of high-power construction machinery, so reducing its interior noise can greatly improve the man-machine environment. Models of a loader cab and its acoustic cavity are built separately to compose an acoustic-structural coupling model that is verified by single input and multiple output (SIMO) mode test. The excited force of the suspension points is measured. Then, the frequency response analysis and the prediction of the cab interior noise are carried out. Acoustic sensitivity analysis and the acoustic panel contribution of the cab are performed using the acoustic transfer vector method. Topography optimization is carried out on the critical panels based on the acoustic panel contribution analysis. Then, rubber damping material is applied to reduce the vibration. Finally, the second prediction of the virtual pressure is carried out. The acoustic sensitivity analysis can obtain several critical vibro-acoustic coupling frequencies, and the panel contribution analysis based on the acoustic transfer vector method can determine the critical panels that accurately produce the noise peak values. In addition, the scheme of the topography optimization and rubber damping materials has a remarkable effect on noise reduction, and the overall sound pressure level dropped by 4.43dB. This scheme provides a technical route to design a low-noise car body systematically, decrease the subjectivity and repetitions of the traditional process, reduce design costs, and shorten the design cycle. © 2016, Editorial Department of JVMD. All right reserved.
引用
收藏
页码：568 / 574
页数：6
相关论文
共 18 条
  • [1] Gladwell G.M.L., Zimmermann G., On energy and complementary energy formulations of acoustic and structural vibration problem, Journal of Sound and Vibration, 3, 3, pp. 233-241, (1966)
  • [2] Sung S.H., Nefske D.J., A coupled structural-acoustic finite element model for vehicle interior noise analysis, Journal of Vibration, Acoustics Stress and Reliability in Design, 106, 2, pp. 314-318, (1984)
  • [3] Liu Y., Yu F., Liu J., Modal analysis of vehicle compartment with acoustic-structure coupling, Journal of Noise and Vibration Contral, 8, pp. 38-40, (2005)
  • [4] Hui W., Liu G., Wu L., Finite element analysis on the car interior low-frequency noise with acoustic-structural coupling, Journal of Automotive Engineering, 28, 12, pp. 1070-1073, (2006)
  • [5] Liu P., Liu G., Hui W., Analysis of cab structure vibration and its acoustic coupling noise response, Journal of Mechanical Science and Technology, 25, 7, pp. 856-859, (2006)
  • [6] Shu L., Fang Z., Zhao G., Topology optimization design for noise reduction in a truck cab interior, Journal of Mechanical Science and Technology, 27, 3, pp. 113-116, (2008)
  • [7] Guo N., Shi W., Liu W., Et al., Analysis and optimization of vibration and noise for driving axle of a light bus, Journal of Vibration, Measurement & Diagnosis, 32, 4, pp. 608-613, (2012)
  • [8] Chen S., Design sensitivity analysis of vibration modes by finite element perturbation, International Modal Analysis Conference, pp. 38-43, (1986)
  • [9] Adelman H.M., Haftka R.T., Sensitivity analysis of discrete structural systems, AIAA Journal, 24, 5, pp. 823-832, (1986)
  • [10] Zuo Y., Fang Y., Acoustic sensitivity analysis of a tractor cab model, Transactions of the CSAE, 21, 3, pp. 126-129, (2005)
12