Low damage processing of titanium gemstone crystal based on chemical mechanical polishing

被引：0
|
作者：
Jin S. [1 ]
Tong H. [1 ]
Zhang Y. [1 ]
Fu Y. [1 ]
机构：
[1] School of Opto-Electronic Engineering, Changchun University of Science and Technology, Changchun
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2019年 / 48卷 / 12期
关键词：
Chemica-mechanical polishing; Grayscale correlation; Surface rickets; Surface roughness; Titanium gemstone;
D O I：
10.3788/IRLA201948.1215002
中图分类号：
学科分类号：
摘要：
A systematic study on the low damage processing of titanium gemstone crystal surface was carried out. The orthogonal experiment was carried out on the CCOS numerical control small grinding head polishing machine. Different polishing liquids were used to chemically polish the titanium gemstone to effectively remove the subsurface damage during the fine grinding stage. The experiment proves that the SiO2 silicon solution has good polishing effect as an abrasive, and is suitable as a polishing liquid for processing titanium gemstone. The four factors of polishing disc type, polishing disc pressure, polishing disc speed and silica sol dilution concentration and the relationship between surface roughness and surface rickets of titanium gemstone crystal were studied, and the influence of process parameters on the process of low-defect processing of titanium gemstone was obtained. Experiments were carried out according to the optimized process parameters, and a low-defect, high-precision titanium gemstone surface was obtained. The method of grayscale correlation was employed to optimize polishing parameters. After optimization, the system was under the condition of the best combination of processing technique. Finally, a well processed titanium gemstone crystal is obtained, the surface of which possesses a roughness of 0.262 nm and the surface defect rate of the polished crystal is 1.4×10-3 mm-1. © 2019, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
相关论文
共 15 条
  • [1] You X., Zhang B., Influence of optical element quality on signal-to-noise ratio of infrared optical system, Infrared and Laser Engineering, 47, 3, pp. 263-271, (2018)
  • [2] You X., Hu X., Peng J., Et al., Influence of element defect on stray radiation characteristics of infrared optical system, Infrared and Laser Engineering, Engineering, 46, 1, (2017)
  • [3] Nakamura S., Senoh M., Iwasa N., High brigtness InGaN blue, green and yellow light-emitting diodes with quantum well structures, Jap J Appl Phys, 34, 7, (1995)
  • [4] Zhong B., Chen X., Wang J., Et al., Manufacturing and testing of high precision off-axis aspheric lens, Infrared and Laser Engineering, 47, 7, (2018)
  • [5] Wang X., Xu Q., Zhang Y., Et al., Self-excited pulsed cavitation jet polishing technique for nano-colloids, Optical Precision Engineering, 26, 9, pp. 2295-2304, (2018)
  • [6] Yang Z., Jin Z., Chen J., Et al., Reactive ion etching and polishing of polyimide film, Optical Precision Engineering, 27, 2, pp. 302-308, (2019)
  • [7] Prochnow E., Edwards D.F., Preparing precision ultrafine sapphire surfaces: a practical method, Appl Opt, 16, 25, pp. 2639-2640, (1986)
  • [8] Preston F., The theory and design of Plate glass Polishing machines, J Soc Glass Technol, 9, pp. 214-256, (1927)
  • [9] Kim D.W., Static tool influence function for fabrication simulation of hexagonal mirror segments for extremely large telescopes, Optics Express, 13, 3, pp. 910-917, (2005)
  • [10] Wang Q., Yu J., Zhang F., The comparison of the polishing characteristics of the small polishing disk in the numerical control polishing, Optics and Precision Engineering, 7, 5, pp. 73-80, (1999)
12