Limit cutting depth prediction for automobile dies finishing machining of convex surface

被引：4
|
作者：
The Lab of National and Local United Engineering for High-Efficiency Cutting & Tools, Harbin University of Science and Technology, Harbin [1 ]
150080, China
机构：
来源：
Jixie Gongcheng Xuebao | / 2卷 / 117-126期
关键词：
Compendex;
D O I：
10.3901/JME.2015.02.117
中图分类号：
学科分类号：
摘要：
Hardening
引用
收藏
相关论文
共 31 条
  • [1] Prediction of surface quality and parameter in bearing convex raceway finishing
    Tao, B.
    Wang, X. Y.
    Zhen, H. Z.
    Xu, W. J.
    PRECISION SURFACE FINISHING AND DEBURRING TECHNOLOGY, 2007, 24-25 : 361 - 370
  • [2] Equalization Control of Machining Surface by Cutting Depth Estimation Using Machining Support System
    Kawaguchi, Tomoyuki
    Sakamoto, Ryota
    Yano, Ken'ichi
    Fofana, Mustapha S.
    2013 IEEE/SICE INTERNATIONAL SYMPOSIUM ON SYSTEM INTEGRATION (SII), 2013, : 574 - 579
  • [3] Prediction of surface roughness in the machining of carbon steels by cutting tools
    Sahin, Y
    Motorcu, AR
    MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2, 2004, 712 : 1414 - 1419
  • [4] Depth prediction in laser machining with the aid of surface temperature measurements
    Chryssolouris, G.
    Yablon, A.
    CIRP Annals - Manufacturing Technology, 1993, 42 (01) : 205 - 207
  • [5] EFFECTS OF CUTTING DIRECTION, RAKE ANGLE, AND DEPTH OF CUT ON CUTTING FORCES AND SURFACE QUALITY DURING MACHINING OF BALSAM FIR
    Kuljich, Svetka
    Hernandez, Roger E.
    Llave, Angela M.
    Koubaa, Ahmed
    WOOD AND FIBER SCIENCE, 2013, 45 (02): : 195 - 205
  • [6] The effect of cutting depth and cutting tool geometry on surface roughness and tool wear behavior in the machining of Al 6061 alloy
    Pul, Muharrem
    Ozerkan, Haci Bekir
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2022, 37 (04): : 2013 - 2024
  • [7] The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron
    Parhad, Prashant
    Likhite, Ajay
    Bhatt, Jatin
    Peshwe, Dilip
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (01) : 99 - 108
  • [8] The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron
    Prashant Parhad
    Ajay Likhite
    Jatin Bhatt
    Dilip Peshwe
    Transactions of the Indian Institute of Metals, 2015, 68 : 99 - 108
  • [9] The Structure of the Surface Layer of 0.4C-1Cr Structural Steel after Finishing Stages of Machining by Cutting
    Pimonov, M., V
    Romanov, D. A.
    Chen, H.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2021, 12 (03) : 707 - 717
  • [10] Surface Roughness Prediction Based on the Average Cutting Depth of Abrasive Grains in Belt Grinding
    Qi, Junde
    Chen, Bing
    2018 3RD INTERNATIONAL CONFERENCE ON MECHANICAL, CONTROL AND COMPUTER ENGINEERING (ICMCCE), 2018, : 169 - 174
1234