Influence of tooth profile modification on design transmission error of involute spur gear

被引：0
|
作者：
Chen H. [1 ,2 ]
Zhu Y. [1 ]
Mao J. [1 ]
Wang X. [1 ]
机构：
[1] College of Mechanical Engineering, Liaoning Technical University, Fuxin, 123000, Liaoning
[2] Dynamic Research for High-end Complete Integrated Coal Mining Equipment and Big Data Analysis Center, China National Coal Association, Fuxin, 123000, Liaoning
来源：
| 2018年 / Huazhong University of Science and Technology卷 / 46期
关键词：
Design transmission error; Gear; Mesh stiffness; Optimal design; Tooth profile modification;
D O I：
10.13245/j.hust.180317
中图分类号：
学科分类号：
摘要：
Tooth profile modification mathematical model was established on the basis of tooth profile principle. Gear design transmission error mathematical model before and after tooth profile modification were established by simplifying gear as variable cross-section cantilever beam on the basis of elastic deformation theory and involute forming principle, considering the variation with tooth profile of the odd and even teeth alternating meshing region in the process of gear transmission. In order to reduce gear system stiffness excitation, the reduction of gear transmission error fluctuation amplitude and peak value were taken as objectives, and profile modification, profile modification length and profile modification curve were taken as design variable. The tooth profile modification optimal model was established, and multi-objective genetic algorithm NSGA-II was adopted to solve the model. The optimal profile modification for the gear transmission system of ranging arm of shearer was performed, and the influence of profile modification, profile modification length and profile modification curve on gear design transmission error were analyzed from the time domain using quantitative analysis method. The results show that right profile modification can reduce design transmission error fluctuation amplitude which reaches the minimum when the profile modification is 9 μm. The profile modification length has influence on design transmission error peak which reaches the minimum when profile modification starting point is the highest point of odd tooth meshing, and design transmission error curve fluctuation of parabolic modification is more flat than linear modification. © 2018, Editorial Board of Journal of Huazhong University of Science and Technology. All right reserved.
引用
收藏
页码：91 / 97and132
相关论文
共 14 条
  • [1] Li Y., Hu X., Shen W., Et al., Gear modification analysis to improve the vibration and noise of the automobile transmission, Progress in Manufacturing Automation Technology and Application, 579, pp. 265-269, (2014)
  • [2] Lin T., He Z., Analytical method for coupled transmission error of helical gear system with machining errors, assembly errors and tooth modifications, Mechanical Systems and Signal Processing, 91, 23, pp. 45-50, (2017)
  • [3] Ghosh S.S., Chakraborty G., On optimal tooth profile modification for reduction of vibration and noise in spur gear pairs, Mechanism and Machine Theory, 105, pp. 145-163, (2016)
  • [4] Bruyere J., Velex P., A simplified multi-objective analysis of optimum profile modifications in spur and helical gears, Mechanism and Machine Theory, 80, pp. 70-83, (2014)
  • [5] Dong J., Wang S., Guo J., Et al., Effect of tooth profile modification on vibration of power split gear transmission system, Journal of Harbin Institute of Technology, 3, pp. 61-68, (2016)
  • [6] Wen F., Cai G., Wang H., Et al., Study on dynamic characteristic of internal parallel moving gears transmission with balance structure, Advanced Materials Research, 657, pp. 537-541, (2013)
  • [7] Zhan J., Mohammad F., Reza J., A CAD-FEM-QSA integration technique for determining the time-varying meshing stiffness of gear pairs, Measurement, 100, pp. 139-149, (2017)
  • [8] Welbourn D.B., Fundamental knowledge of gear noise-a survey, Proc Noise & Vib of Eng and Trans, 7, pp. 9-14, (1979)
  • [9] Velex P., Chapron M., Fakhfakh H., Et al., On transmission errors and profile modifications minimizing dynamic tooth loads in multi-mesh gears, Journal of Sound and Vibration, 379, pp. 28-52, (2016)
  • [10] Li X.Y., Wang N.N., Lv Y.G., Et al., Tooth profile modification and simulation analysis of involute spur gear, Int J Simul Model, 15, 4, pp. 649-662, (2016)
12