Study on surface modification of carbon fiber felt

被引：0
|
作者：
Ji, A-Lin [1 ]
Li, He-Jun [1 ]
Cui, Hong [2 ]
Cheng, Wen [2 ]
Zhang, Xiao-Hu [2 ]
Bai, Xia [2 ]
Ma, Wen-Min [2 ]
机构：
[1] The Material Institute, Northwestern Polytechnical University, Xi'an 710072, China
[2] Xi'an Aerospace Composites Research Institute, Xi'an 710025, China
来源：
Guti Huojian Jishu/Journal of Solid Rocket Technology | 2009年 / 32卷 / 06期
关键词：
Felts - Felt - Surface treatment - Water treatment;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To improve needling property of the carbon fiber felt, dimethyl siloxane, imidazole and water-soluble dimethyl siloxane were used as the surface modification agent of fiber felt. Then the samples were prepared by using the same needling process. The SEM shows that the felt fibers are conglutinated each other after treated with dimethyl siloxane, but the felt fibers after treated with the water-soluble dimethyl siloxane are loose and their surface is smooth. Among three kinds of samples, the peel strength of the sample treated with imidazole is up to 0.144 MPa, the others reach 0.128 MPa. Due to dissolving with water at any scale and low cost, the water-soluble dimethyl siloxane becomes the ideal surface treatment agent for carbon fiber felt.
引用
收藏
页码：673 / 676
相关论文
共 50 条
  • [1] Study on carbon fiber surface modification by electropolymerization
    Zhang, Fusheng
    Hu, Luguang
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 1997, 14 (02): : 12 - 16
  • [2] Surface modification of carbon fiber/epoxy composites with randomly oriented aramid fiber felt for adhesion strength enhancement
    Choi, Ilbeom
    Lee, Dai Gil
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 48 : 1 - 8
  • [3] Experimental study on the influence of surface modification methods of carbon fiber felt on the operation and heat transfer characteristics of loop heat pipes
    Zhang, Yixue
    Liu, Junyu
    Cheng, He
    Luan, Tao
    Yang, Tongqing
    Xue, Hongyao
    APPLIED THERMAL ENGINEERING, 2023, 233
  • [4] Electrochemical modification of the carbon fiber surface
    Grigoryan, N. S.
    Gubanov, A. A.
    Vagramyan, T. A.
    Korshak, Yu. V.
    RUSSIAN JOURNAL OF APPLIED CHEMISTRY, 2015, 88 (07) : 1150 - 1156
  • [5] Electrochemical modification of the carbon fiber surface
    N. S. Grigoryan
    A. A. Gubanov
    T. A. Vagramyan
    Yu. V. Korshak
    Russian Journal of Applied Chemistry, 2015, 88 : 1150 - 1156
  • [6] Research progress on the surface modification of carbon fiber
    Peng, Xingcai
    Wu, Yifan
    Wei, Ziming
    RSC ADVANCES, 2024, 14 (06) : 4043 - 4064
  • [7] Surface modification of commercial carbon felt used as anode for Microbial Fuel Cells
    Hidalgo, Diana
    Tommasi, Tonia
    Bocchini, Sergio
    Chiolerio, Alessandro
    Chiodoni, Angelica
    Mazzarino, Italo
    Ruggeri, Bernardo
    ENERGY, 2016, 99 : 193 - 201
  • [8] Effect of carbon fiber surface modification on properties of carbon fiber and carbon fiber reinforced composite materials
    Altay L.
    Sarikanat M.
    Tekstil ve Muhendis, 2019, 26 (113): : 25 - 32
  • [9] Sensing characteristics of a carbon fiber felt
    Song Xian-hui
    Lu Yong
    Zhang Xiao-yu
    Li Zhuo-qiu
    NEW CARBON MATERIALS, 2008, 23 (02) : 189 - 192
  • [10] Study on the surface modification of technora fiber
    You Zhiqiang
    Chen Lei
    Yu Junrong
    Zhu Jing
    Hu Zuming
    PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS, VOLS 1 AND 2, 2009, : 289 - 292
12345