Design and Experiment of Horizontal Push Seedling Transplanting Mechanism for Rapeseed Seedling Opening Groove

被引:0
|
作者
Xiao M. [1 ,2 ]
Xiao S. [1 ]
Chen B. [1 ]
Sun S. [1 ,2 ]
Xiong L. [1 ]
机构
[1] School of Engineering, Hunan Agricultural University, Changsha
[2] Hunan Modern Agricultural Machinery Engineering and Technology Research Center, Changsha
关键词
Horizontal push seedlings; Planting institutions; Rapeseed; Seedling; Transplanting;
D O I
10.6041/j.issn.1000-1298.2019.10.006
中图分类号
学科分类号
摘要
In order to improve the efficiency and quality of rapeseed seedling transplanting, and reduce planting cost, improve planting efficiency, realize rapeseed seedling high-speed transplanting, a set of transplanting mechanism which suitable for horizontal push seedling transplanting in grooves was designed. In order to analyze and optimize the structural parameters of the mechanism, the mathematical model and kinematics equations of the mechanism were established, and a human-computer interactive program based on Matlab was prepared. Based on the agronomic requirements of horizontal push seedling transplanting in rapeseed, the relationship between the movement trajectory of planting mechanism and the yield of vertical transplanting of seedlings was established. According to the simulation results, a group of parameters such as length, installation position and initial angle of the mechanism were optimized, and a transplanting test device for rapeseed seedlings was designed and manufactured. The static and dynamic trajectory curves of the transplanting mechanism were tested by sensors, it was proved that the actual motion law of the prototype met the requirements of simulation design, and the mechanism design, mathematical model, software program and relational model were accurate. The laboratory seedling test showed that the pass rate of horizontal push seedling planting was not less than 90%, under the conditions of the transplanting plant distance was 0.2 ~ 0.3 m at mechanical driving speed of about 0.4 ~ 0.6 m/s, and the frequency of the planting mechanism was between 1 Hz and 1.5 Hz, the transplanting depth was about 0.04 ~ 0.06 m. The experimental results showed that the transplanting of horizontal push seedlings can meet the requirements and high efficiency of the transplanting of rape seedlings, the research result had certain guiding significance for horizontal seedling transplanting. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码:56 / 63and71
页数:6315
相关论文
共 22 条
  • [1] Xiong Q., Wen J., Li X., Et al., Technological innovation and industrial development of rapeseed in China, Journal of Agricultural Science and Technology, 16, 3, pp. 14-22, (2014)
  • [2] Cheng Y., Effects of seeding broadcasting with no-tillage cultication on crop growth and grain yield under rapeseed-rice-rice rotation, (2012)
  • [3] Hu M., Effects of differrent sowing date stransplanting densities and nitrogen fertilizer application on growth and development and yield of rape in paddy field, (2012)
  • [4] Yuan W., Wu C., Yu X., Et al., Preliminary study on the researching prospect of rape transplanter in heavy soil conditions, Chinese Agricultural Mechanization, 32, 1, (2011)
  • [5] Tang Y., Effects of transplanting methods and period on the yield and quality of forage and oilseed rape, (2018)
  • [6] Cui W., Xu P., Wang H., Et al., Present status and analysis of dry-land auto-transplanting seedling technique, Journal of Agricultural Mechanization Research, 37, 6, (2015)
  • [7] Zhang M., Ji J., Du X., Status and prospect of transplanter at home and abroad, Agricultural Engineering, 2, 2, pp. 21-23, (2012)
  • [8] Han C., Zhang X., Yang W., Et al., Present status and analysis of dry-land auto-transplanting seedling technique, Journal of Agricultural Mechanization Research, 33, 11, pp. 238-240, (2011)
  • [9] Liu M., Design and experimental study on double five-bar transplanting mechanism of rape pot seeding transplanter, (2015)
  • [10] Xiao M., Sun S., Luo H., Et al., Kinematic analysis and experiment of dual parallelogram multi-pole planting mechanism, Transactions of the CSAE, 30, 17, pp. 25-33, (2014)