Process simulation and analysis of the fushun-type oil shale retorting system

被引：0
|
作者：
Bai, Zhang [1 ]
Bai, Jingru [1 ]
Wang, Qing [1 ]
Li, Xuemei [2 ]
机构：
[1] Engineering Research Centre of Ministry of Education for Comprehensive Utilization of Oil Shale, Northeast Dianli University, Jilin 132012, Jilin Province, China
[2] Institute of Engineering Thermophysics, Chinese Academy of Sciences, Haidian District, Beijing 100190, China
来源：
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2014年 / 34卷 / 14期
关键词：
Shale oil - Gases - Gas turbines - Computer software;
D O I：
10.13334/j.0258-8013.pcsee.2014.14.002
中图分类号：
学科分类号：
摘要：
Fushun-type oil shale retorting system plays an important role in Chinese oil shale industry and the retorting process is simulated by using Aspen Plus software. The results were verified by comparing the material balance and thermal balance with the practical system. Meanwhile, this paper investigated the variation of gas flow, composition, heat value and the power through changing the feeding air's saturation. Furthermore, the influence of circulating gas temperature on process was analyzed as well. The results show that feeding air's saturation varied from 0°C to 90°C can reduce the circulating gas flow and fuel gas consumption by 20%, and increase the power generation of gas turbine from 4.07?MW to 44.12?MW. However, increase of the circulating gas temperature from 600°C to 700°C has a little effect on process but almost reduces the circulating gas' flow by 20%. © 2013 Chinese Optics Letters.
引用
收藏
页码：2228 / 2234
相关论文
共 50 条
  • [1] Exergetic life cycle assessment of Fushun-type shale oil production process
    Wang, Qingqiang
    Ma, Yue
    Li, Shuyuan
    Hou, Jili
    Shi, Jian
    ENERGY CONVERSION AND MANAGEMENT, 2018, 164 : 508 - 517
  • [2] General description of Fushun oil shale retorting factory in China
    Zhou, CL
    OIL SHALE, 1996, 13 (01) : 7 - 11
  • [3] PROCESS SIMULATION OF OIL SHALE COMPREHENSIVE UTILIZATION SYSTEM BASED ON HUADIAN-TYPE RETORTING TECHNIQUE
    Bai Jing-Ru
    Bai Zhang
    Wang Qing
    Li Shu-Yuan
    OIL SHALE, 2015, 32 (01) : 66 - 81
  • [4] Advanced exergy analysis of an oil shale retorting process
    Yang, Qingchun
    Qian, Yu
    Kraslawski, Andrzej
    Zhou, Huairong
    Yang, Siyu
    APPLIED ENERGY, 2016, 165 : 405 - 415
  • [5] CHEVRON OIL-SHALE RETORTING PROCESS
    TAMM, PW
    BERTELSEN, CA
    HANDEL, GM
    SPARS, BG
    WALLMAN, PH
    IN SITU, 1981, 5 (03): : 241 - 241
  • [6] Expanding exergy analysis for the sustainability assessment of SJ-type oil shale retorting process
    Wang, Qingqiang
    Ma, Yue
    Li, Shuyuan
    Yue, Changtao
    He, Lu
    ENERGY CONVERSION AND MANAGEMENT, 2019, 187 : 29 - 40
  • [7] Advanced exergoenvironmental analysis of the oil shale retorting process with SJ-type rectangular retort
    Wang, Qingqiang
    Hou, Jili
    Wei, Xing
    Jin, Nan
    Ma, Yue
    Li, Shuyuan
    Zhao, Yuchao
    ENERGY, 2022, 260
  • [8] A FEASIBILITY STUDY OF AN IN SITU RETORTING PROCESS FOR OIL SHALE
    BARNES, AL
    ROWE, AM
    SOCIETY OF PETROLEUM ENGINEERS JOURNAL, 1968, 8 (03): : 231 - &
  • [9] A FEASIBILITY STUDY OF AN IN SITU RETORTING PROCESS FOR OIL SHALE
    BARNES, AL
    ROWE, AM
    JOURNAL OF PETROLEUM TECHNOLOGY, 1967, 19 (09): : 1160 - &
  • [10] LURGI RUHRGAS PROCESS IN THE RETORTING OF OIL SHALE.
    Weiss, Hans J.
    Energy (Norwalk, Connecticut), 1983, 8 (01): : 17 - 18
12345