Calculating method for additional load loss coefficient of spindle system of CNC machine tools

被引：11
|
作者：
Liu P. [1 ]
Liu S. [2 ]
Liu F. [1 ]
机构：
[1] The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing
[2] College of Mechanical and Power Engineering, Chongqing University of Science & Technology, Chongqing
来源：
| 1600年 / Chinese Mechanical Engineering Society卷 / 52期
关键词：
Additional load losses; Additional load losses coefficient; CNC machine tools; Spindle system;
D O I：
10.3901/JME.2016.11.121
中图分类号：
学科分类号：
摘要：
Machine tools are in enormous quantity and consume substantial amounts of energy, but the energy efficiency of machine tools with complicated laws is very low. Therefore, the researches and applications of machine tools' energy efficiency are attracting more and more attentions on the international scene in recent years. The additional load losses, determined by additional load losses coefficient, are of great importance for investigating the energy efficiency of machine tools because those account for 10%-20% of the cutting power. To solve the difficult acquisition of additional load losses coefficient on the scene, based on the mathematical model of the additional load losses, proposes a method to calculate the additional load losses coefficient of spindle system of CNC machine tools. The mathematical model include three models: The approximate calculation model of inverter's power loss which is based on the basic parameters of the rated power, rated power loss and cooler's rated power of inverter; the power loss model of main motor which is based on the basic parameters of the rated power, fundamental frequency, the idle power loss and efficiency under the fundamental frequency of spindle motor; the mathematical model of the additional load losses of main transmission system which is based on the basic parameters of the number of transmission-countershaft's type and the efficiency of each type of transmission-countershaft. To calculate the additional load losses coefficient on the scene, we just need obtain the basic parameters and measure the idle power of spindle system. According to the calculating method, the additional load losses coefficient of the spindle system of CNC machining center PL700 is calculated. The experiment results show the accuracy and practicability of the proposed method. This calculating method can be widely applied to obtain the cutting power and analyze the energy efficiency of CNC machine tools, predicting and optimizing the energy efficiency of work piece, and so on. © 2016 Journal of Mechanical Engineering.
引用
收藏
页码：121 / 128
页数：7
相关论文
共 13 条
  • [1] Liu F., Wang Q., Liu G., Content architecture and future trends of energy efficiency research on machining system, Journal of Mechanical Engineering, 49, 19, pp. 87-94, (2013)
  • [2] Hu S., Liu F., He Y., Et al., An on-line approach for energy efficiency monitoring of machine tools, Journal of Cleaner Production, 27, pp. 133-140, (2012)
  • [3] Liu F., Xu Z., Dan B., Energy Characteristics of Machining Systems and Its Application, (1995)
  • [4] Hu S., Liu F., He Y., Et al., Characteristics of additional load losses of spindle system of machine tools, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4, 7, pp. 1221-1233, (2010)
  • [5] Shi J., Liu F., Xu D., Et al., Power balance equation about the numerical control machine tool's main driver system driven by variable voltage variable frequency, Journal of Mechanical Engineering, 46, 3, pp. 118-124, (2010)
  • [6] Liu F., Liu S., Mutli-period energy model of electromechanical main driving system during the service process of machine tools, Journal of Mechanical Engineering, 48, 21, pp. 132-140, (2012)
  • [7] Liu S., Liu F., Hu S., Et al., Energy survey of machine tools: Separating power information of the main transmission system during machining process, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 6, 4, pp. 445-455, (2012)
  • [8] Zhang C., Cui N., Ni K., AC Motor Variable Frequency Speed Control and Its Application, (2013)
  • [9] Zhang M., Shen J., Li W., Et al., Calculation method of a fast power loss for IGBT modules, Ship Electrical Technology, 29, 1, pp. 33-36, (2009)
  • [10] Sheng K., Finney S.J., Williams B.W., A new analytical IGBT model with improved electrical characteristics, IEEE Transactions on Power Electronics, 14, 1, pp. 98-107, (1999)
12