Fabrication, anti-corrosion and antifouling performance of superhydrophobic aluminum alloy surface

被引:0
|
作者
Firdavs S. [1 ]
Wang J. [1 ]
Zhou J.-X. [1 ]
Feng L.-B. [1 ]
机构
[1] School of Materials Science and Engineering, Lanzhou Jiaotong University, Lanzhou
基金
中国国家自然科学基金;
关键词
Aluminum alloy; Anti-corrosion; Antifouling; One-step immersion; Superhydrophobic;
D O I
10.11817/j.ysxb.1004.0609.2020-39298
中图分类号
学科分类号
摘要
It is necessary of preparing superhydrophobic aluminum alloy surfaces by simple and environment-friendly method. Meanwhile, it is also quite important of endowing the aluminum alloys with excellent corrosion resistance and anti-fouling performance so that the application scope of aluminum alloys can be expanded. Herein, without pre-polishing, a facile and environment-friendly method was developed to fabricate the superhydrophobic aluminum alloy surface with a one-step immersion in alcohol-water solution. The water contact angle at the resultant aluminum alloy surface can reach 153.6° while the rolling angle is less than 5°. The surface wettability, microstructure, chemical structure, antifouling and anti-corrosion performance of the obtained superhydrophobic aluminum alloy surface were investigated by means of contact angle measurement, scanning electron microscope, infrared spectrum analysis, antifouling and anti-corrosion experiments, respectively. The results indicate that both micro- and nano-scaled binary structure form on the resultant aluminum alloy surface. Meanwhile, long alkyl chains are grafted chemically onto the rough aluminum alloy surface successfully. Consequently, the aluminum alloy obtains excellent superhydrophobicity. Moreover, the superhydrophobicity has variety, universality, and good stability. Then, just based on the superhydrophobicity, the aluminum alloy wins excellent corrosion resistance and antifouling performance. © 2020, Science Press. All right reserved.
引用
收藏
页码:2316 / 2321
页数:5
相关论文
共 15 条
  • [1] FENG L B, YAN Z N, QIANG X H, QIANG X H, LIU Y H, WANG Y P., Facile formation of superhydrophobic aluminum alloy surface and corrosion-resistant behavior, Applied Physics A, 122, 3, (2016)
  • [2] ZUO Z P, LIAO R J, GUO C, YUAN Y, ZHAO X T, ZHUANG A Y, ZHANG Y Y., Fabrication and anti-icing property of coral-like superhydrophobic aluminum surface, Applied Surface Science, 331, pp. 132-139, (2015)
  • [3] SHASHANK S, YUNG C. S., Superhydrophobic contoured surfaces created on metal and polymer using a femtosecond laser, Applied Surface Science, 405, pp. 465-475, (2017)
  • [4] LI H, YU S R, HAN X X., Fabrication of CuO hierarchical flower-like structures with biomimetic superamphiphobic, self-cleaning and corrosion resistance properties, Chemical Engineering Journal, 283, pp. 1443-1454, (2016)
  • [5] HE Jia-wen, Comments on nano-treatment of urface attrition via historical review, China Surface Engineering, 27, 5, pp. 1-13, (2014)
  • [6] ZHENG S L, LI C, FU Q T, LI M, HU W, WAGN Q, DU M P., Fabrication of self-cleaning superhydrophobic surface on aluminum alloys with excellent corrosion resistance, Surface & Coatings Technology, 276, pp. 341-348, (2015)
  • [7] LI J H, LIU Q, WANG L Y, CHEN R R, TAKAHASHI K, LI R M, LIU L H, WANG J., Formation of a corrosion-resistant and anti-icing superhydrophobic surface on magnesium alloy via a single-step Method, Electrochemical Society, 163, 5, pp. 213-220, (2016)
  • [8] LI X, ZHANG Q, GUO Z, SHI T, YU J H, TANG M K, HUANG X J., Fabrication of superhydrophobic surface with improved corrosion inhibition on 6061 aluminum alloy substrate, Applied Surface Science, 342, pp. 76-83, (2015)
  • [9] NASER V M, ROUHOLLAH K, SAEED R., Super dewetting surfaces: Focusing on their design and fabrication, Colloids and Surfaces A, 484, pp. 528-546, (2015)
  • [10] YAN Zhong-na, CHE Yan-hui, FENG Li-bang, QIANG Xiao-hu, LIU Yan-hua, Anti-icing and anti-adhesion behavior of superhydrophobic aluminum alloy surface, Journal of Materials Engineering, 43, 9, pp. 25-29, (2015)