Wear and friction of boride layer in CoCrMo alloy under different micro-abrasion modes (rolling and grooving abrasion)

被引：0
|
作者：
Reséndiz-Calderón, C.D. [1 ]
Farfan-Cabrera, L.I. [1 ]
Oseguera-Peña, J.E. [1 ]
Rodríguez-Castro, G.A. [2 ]
机构：
[1] Tecnologico de Monterrey, Escuela de Ingeniería y Ciencias, Ave. Eugenio Garza Sada 2501, Monterrey,N.L.,64849, Mexico
[2] Instituto Politécnico Nacional, SEPI-ESIME Zacatenco, México,D.F.,07738, Mexico
来源：
Materials Letters | 2021年 / 279卷
关键词：
Abrasion - Chromium alloys - Borides - Wear resistance - Cobalt alloys - Erosion - Friction;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
New data about coefficient of friction (CoF) behavior and wear rates of boriding CoCrMo alloy under rolling and grooving micro-abrasion modes is presented in this work. The hard-cobalt boride layer was produced on an ASTM F1537 CoCrMo alloy by a powder-pack boriding treatment. The tribological tests were run in an instrumented micro-abrasion tester. The results demonstrated that boriding improves the wear resistance under both micro-abrasion wear modes while it decreased CoF only under the grooving abrasion mechanism. © 2020
引用
收藏
相关论文
共 8 条
  • [1] Wear and friction of boride layer in CoCrMo alloy under different micro-abrasion modes (rolling and grooving abrasion)
    Resendiz-Calderon, C. D.
    Farfan-Cabrera, L. I.
    Oseguera-Pena, J. E.
    Rodriguez-Castro, G. A.
    MATERIALS LETTERS, 2020, 279
  • [2] Friction and Wear of Metals under Micro-abrasion, Wet and Dry Sliding Conditions
    Resendiz-Calderon, Cesar David
    Farfan-Cabrera, Leonardo Israel
    Oseguera-Pena, Joaquin Esteban
    Cazares-Ramirez, Irving
    Gallardo-Hernandez, Ezequiel Alberto
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (09) : 6228 - 6238
  • [3] Friction and Wear of Metals under Micro-abrasion, Wet and Dry Sliding Conditions
    Cesar David Resendiz-Calderon
    Leonardo Israel Farfan-Cabrera
    Joaquín Esteban Oseguera-Peña
    Irving Cázares-Ramírez
    Ezequiel Alberto Gallardo-Hernandez
    Journal of Materials Engineering and Performance, 2020, 29 : 6228 - 6238
  • [4] Study on the Micro-Abrasion Wear Behavior of PVD Hard Coating under Different SiC Abrasive Particles/Distilled Water Ratios
    Baptista, Andresa
    Pinto, Gustavo F.
    Sousa, Vitor F. C.
    Silva, Francisco J. G.
    Fernandes, Filipe
    MATERIALS, 2023, 16 (08)
  • [5] Micro-abrasion wear testing of triode plasma diffusion and duplex treated Ti-6Al-4V alloy
    Cassar, G.
    Banfield, S.
    Wilson, J. C. Avelar-Batista
    Housden, J.
    Matthews, A.
    Leyland, A.
    WEAR, 2012, 274 : 377 - 387
  • [6] Micro-abrasion/Corrosion Behavior of Pack-Borided AISI 316L Steel and ASTM F1537 CoCrMo Alloy in Ceramic-on-Ceramic Couplings
    Cesar David Resendiz-Calderon
    Leonardo Israel Farfan-Cabrera
    German Anibal Rodríguez-Castro
    Ezequiel Alberto Gallardo-Hernandez
    Journal of Materials Engineering and Performance, 2021, 30 : 3955 - 3967
  • [7] Micro-abrasion/Corrosion Behavior of Pack-Borided AISI 316L Steel and ASTM F1537 CoCrMo Alloy in Ceramic-on-Ceramic Couplings
    Resendiz-Calderon, Cesar David
    Farfan-Cabrera, Leonardo Israel
    Rodriguez-Castro, German Anibal
    Gallardo-Hernandez, Ezequiel Alberto
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (06) : 3955 - 3967
  • [8] Friction and wear of diamond-like carbon film deposited on CoCrMo alloy under different lubrication
    Luo, Yong
    Yang, Ting
    Liu, Qiuzhen
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (07) : 631 - 636
1