Analysis of the gearing accuracy of the worm gear; [Analiza točnosti ozubljenja pužnog kola]

被引：0

作者：

Nieszporek T. ^{[1
]}

Gołębski R. ^{[1
]}

Šooš L. ^{[2
]}

机构：

[1] Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, Czestochowa

[2] Slovak University of Technology in Bratislava, Mechanical Engineering Faculty, Namiestie Slobody 17, Bratislava

来源：

Tehnicki Vjesnik | 2017年 / 24卷 / 04期

关键词：

envelope method; worm gear; wormwheel;

D O I：

10.17559/TV-20160422094400

中图分类号：

学科分类号：

摘要：

The article presents a mathematical model for the determination of the tooth surface of the wormwheel machined by either the tangential or the radial method. Wormwheel machining with a special hob and a modular hob is considered. Different methods of solving the task are presented. This includes also a numerical method that requires the envelope condition to be solved. The described discussion is general in nature. The tool action surface, built based on the worm mating with the wormwheel in the worm gear, may have an arbitrary profile. In the technological gear, made up by the tool and the wormwheel, the rotary motion of the wormwheel was exchanged for its rectilinear motion. The tool positioning errors in the machining process were taken into account. © 2017, Strojarski Facultet. All rights reserved.

引用

页码：993 / 1000

页数：7