A study and application of the relation between concrete quality and raw materials under multiple perspectives

被引:0
|
作者
Huang W. [1 ]
Guo H. [1 ]
机构
[1] School of Civil Engineering and Architecture, Shaanxi University of Technology, Hanzhong
关键词
Coarse aggregate; Concrete; Fine aggregate; Mix proportion study; Raw materials;
D O I
10.2013/IJSSST.a.17.05.20
中图分类号
学科分类号
摘要
This paper mainly introduces the direct influence of concrete, the most widely-used material in construction engineering, on the structure of construction engineering. Raw materials are an important part of the concrete engineering. This paper analyzes the mixture proportion of cement, mineral additives, fine aggregate and coarse aggregate through the technical index control of raw materials of concrete, mix compaction experiment, strength mix proportion experiment of 2.5~5mm aggregate size, strength mix proportion orthogonal experiment of 5mm aggregate size and mix proportion experiment of 5~10mm aggregate size so as to provide an important technical guarantee for the concrete quality. Advanced raw materials testing equipment can efficiently and correctly test and evaluate the quality of raw materials to meet the construction requirement of the modern concrete engineering and provide important references for further study of the relation between concrete and raw materials. © 2016, UK Simulation Society. All rights reserved.
引用
收藏
页码:20.1 / 20.5
相关论文
共 50 条
  • [1] Relation between quality and production cost for pure biodiesel bases on the mixes of raw materials
    Tsanaktsidis, C. G.
    Spinthiropoulos, K. G.
    Guliyev, Fariz
    Dimitriou, D.
    Euthaltsidou, K.
    Tzilantonis, G. T.
    2016 INTERNATIONAL CONFERENCE ON NEW ENERGY AND FUTURE ENERGY SYSTEM (NEFES 2016), 2016, 40
  • [2] BEER QUALITY IN RELATION TO MODERN RAW-MATERIALS
    PFENNINGER, HB
    JOURNAL OF THE INSTITUTE OF BREWING, 1985, 91 (03) : 127 - 127
  • [3] Improving Quality of High Performance Concrete by Cavitation Treatment of the Raw Materials
    Korjakins, Aleksandrs
    Kara, Patricija
    Toropovs, Nikolajs
    MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, 2013, 57 : 597 - 604
  • [4] The Study Progress of the raw Materials of Electrospinning and Their Application
    Wang, Zhongzhong
    Jiao, Xiaoning
    ADVANCED TEXTILE MATERIALS, PTS 1-3, 2011, 332-334 : 1268 - 1271
  • [5] Improving the quality of raw and waste materials with the application of pelletizing processes
    Lampke, Jan P
    Weyrauch, Sandra
    Silge, Steffen
    Aufbereitungs-Technik/Mineral Processing, 2011, 52 (03): : 54 - 61
  • [6] Impact of Technogenic Raw Materials on the Properties of High-Quality Concrete Composites
    Murtazaev, S-A. Yu.
    Zaurbekov, Sh. Sh.
    Saidumov, M. S.
    Alaskhanov, A. Kh.
    Murtazaeva, T. S-A.
    Khadzhiev, M. R.
    PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ENGINEERING AND EARTH SCIENCES: APPLIED AND FUNDAMENTAL RESEARCH (ISEES 2018), 2018, 177 : 275 - 279
  • [7] QUALITY CONTROL (CERAMIC TILE MANUFACTURING) GLAZE RAW MATERIALS AND THEIR RELATION TO QUALITY CONTROL IN PRODUCTION PROCESSING
    ALTSCHUL.O
    AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (04): : 463 - &
  • [8] A design of experiment application to improve raw materials utilization ratio of polymer concrete composites
    Simsek, Baris
    Uygunoglu, Tayfun
    JOURNAL OF ENGINEERING RESEARCH, 2017, 5 (04): : 1 - 18
  • [9] An experimental study on the relation between input variables and output quality of a new concrete recycling process
    Lotfi, Somayeh
    Rem, Peter
    Deja, Jan
    Mroz, Radoslaw
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 137 : 128 - 140
  • [10] APPLICATION OF IR-SPECTROSCOPY FOR STUDY OF ALUMOSILICATE RAW MATERIALS
    Sergeevich, Lebedev Mikhail
    Vladimirovich, Zhernovsky Igor
    Valerievna, Strokova Valeria
    Viktorovna, Fomina Ekaterina
    Ivanovna, Kozhukhova Natalia
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 96 - +