Analysis on temperature field of external thermal insulation composite systems with colorful steel plate

被引：0
|
作者：
Xiong H. [1 ,2 ]
Xu J. [1 ]
Niu Z. [2 ]
Zhou Z. [3 ]
机构：
[1] Department of Civil Engineering, Shanghai University, Shanghai
[2] Building Energy Efficiency Technology Laboratory, Jiaxing University, Jiaxing
[3] Zhejiang Hong Zheng Architectural Design Co., Ltd., Jiaxing
来源：
Jianzhu Cailiao Xuebao/Journal of Building Materials | 2016年 / 19卷 / 04期
关键词：
Colorful steel plate; Decrement; External insulation; Structural layer; Temperature field; Time lag;
D O I：
10.3969/j.issn.1007-9629.2016.04.014
中图分类号：
学科分类号：
摘要：
An experimental design was constructed to measure the temperature field on an external thermal insulation composite system (ETICS) with colorful steel plate (CSP). Three rigs of ETICS with CSP finish of various insulation materials (foam glass, rigid polyurethane foam and foam concrete) were tested inside a weathering test chamber. The thermal fields of the rigs were measured during the heat-rain cycles. Based on the measured temperature data, distribution of temperature on the wall's structural layer, time lag and decrement factor were explored. The results show that the temperatures of the CSP finish and the outer face of the insulation layer tend to change in accordance with the air temperature of the chamber; the temperatures of CSP finish change quickly and intensely (especially near the window) while the temperatures of the bonding layer change slowly. Among the three insulation materials, the rigid polyurethane foam is the most efficient in energy-conservation. In all three ETICSs, each layer tends to cause time lag and decrease in the transmission of thermal waves from the exterior to interior parts, being more obvious in the insulation layer. © 2016, Editorial Department of Journal of Building Materials. All right reserved.
引用
收藏
页码：688 / 693
页数：5
相关论文
共 8 条
  • [1] Zhang Z., Li Z., Dong Y., Development and prospects of heat preserving and energy conservation wall system in buildings, Engineering Mechanics, 24, pp. 121-128, (2007)
  • [2] Huang Z., Study exterior wall external insulation anti-crack technology (First), Construction Technology, 34, 7, pp. 77-80, (2005)
  • [3] Amaro B., Saraiva D., de Brito J., Et al., Inspection and diagnosis system of ETICS on walls, Construction and Building Materials, 47, pp. 1257-1267, (2013)
  • [4] Kunzel H., Kunzel H.M., Sedlbauer K., Long-term performance of external thermal insulation systems (ETICS), ACTA Architectura, 5, 1, pp. 11-24, (2006)
  • [5] Huang Z., Exterior Wall Thermal Insulation Technology Theory and Application, pp. 83-97, (2011)
  • [6] Niu Z.R., Xiong H.R., Yu Z.M., Et al., Monitoring and analysis on temperature for external foam glass thermal insulating system on walls under weathering test, Applied Mechanics and Materials, 71-78, pp. 3918-3924, (2011)
  • [7] Mavromatidis L.E., Mankibi M.E.L., Michel P., Et al., Numerical estimation of time lags and decrement factors for wall complexes including multilayer thermal insulation, in two different climatic zones, Applied Energy, 92, pp. 480-491, (2012)
  • [8] Asan H., Numerical computation of time lags and decrement factors for different building materials, Building and Environment, 41, 5, pp. 615-620, (2006)
1