Experimental study on two-step reaction in combustor of chemical laser

被引：1

作者：

Jin D. ^{[1
]}

Liu W. ^{[1
]}

Chen X. ^{[1
]}

Lu Q. ^{[1
]}

Zhao Y. ^{[1
]}

机构：

[1] College of Opto-Electronic Science and Engineering, National University of Defense Technology

来源：

Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | 2011年 / 23卷 / 08期

关键词：

Backward He; Chemical laser; Combustor; Onward He; Two-step reaction;

D O I：

10.3788/HPLPB20112308.2026

中图分类号：

学科分类号：

摘要：

In experimental facility of cylindrical gain generator assembly for HF chemical laser, primary diluent He is injected into combustor from two different regions. Some of He is injected by D2 jet orifices after being premixed with D2. The other of He is injected by backward He jet orifices at back end of primary nozzle blade. The effect of changing mass flow rate of onward He or backward He on laser's characteristics is studied by a couple of lasing experiments. The experimental results show that, as compared with changing mass flow rate of onward He, changing mass flow rate of backward He can acquire much higher output power and better ignition stability. When primary diluent ratio is required to be increased, changing mass flow rate of backward He should be given priority.

引用

页码：2026 / 2028

页数：2

共 8 条

[1] Gross R.W.F., Bott J.F., Handbook of Chemical Lasers, (1987)
[2] Warren W.R., Cohen N., NF<sub>3</sub> combustor for cylindrical laser, (1987)
[3] Rebone V.K., Fedorov I.A., Maksimov Y.P., Et al., Characteristics of a CW chemical HF laser operating by using a new oxidizing-gas production technique, Quantum Electronics, 34, 9, pp. 795-800, (2004)
[4] Rebone V.K., Fedorov I.A., Maksimov Y.P., Et al., Optimization of characteristics of a chemical HF laser operating by using a new method for oxidizing-gas production, Quantum Electronics, 36, 12, pp. 1155-1160, (2006)
[5] Li L., Yuan S., Hua W., Et al., Numerical study of two-step combustion's application in gas film cooling gain generator, Chinese Journal of Lasers, 37, 8, pp. 1967-1971, (2010)
[6] Liu W., Jin D., Chen X., Et al., First lasing experiment of HF chemical laser based on cylindrical gain generator assembly, Chinese Journal of Lasers, 38, (2011)
[7] Jin D., Liu W., Lu Q., Reduced design and fabricating methods of ring HYLTE nozzle blades, High Power Laser and Particle Beams, 21, 9, pp. 1286-1290, (2009)
[8] Yan B., Yuan S., Wang Z., Et al., Experimental investigation on critical background-pressure ratio of Ventrui for chemical laser, High Power Laser and Particle Beams, 21, 11, pp. 1619-1622, (2009)

← 1 →