Maximum Ratio of Torque to Copper Loss Control of Hybrid Excited Flux Switching Motor Based on Combination Algorithm

被引：0
|
作者：
Li S. [1 ]
Ding W. [2 ]
Li K. [2 ]
机构：
[1] State Grid Shanxi Electric Power Research Institute, Taiyuan
[2] School of Electrical Engineering, Xi'an Jiaotong University, Xi'an
来源：
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2022年 / 37卷 / 07期
关键词：
Copper loss; Excitation current; Hybrid excited flux-switching machine; Maximum ratio of torque to copper loss; Optimization;
D O I：
10.19595/j.cnki.1000-6753.tces.201182
中图分类号：
学科分类号：
摘要：
Hybrid excited flux switching machines (HEFSMs) have the advantages of permanent magnet flux switching motor and hybrid excitation synchronous motor. The air gap magnetic field can be adjusted by adjusting the excitation current. This kind of motor has a wide application prospect in industry, especially in the field of electric vehicles. In this paper, an optimized maximum ratio of torque to copper loss control strategy for HEFSM in full speed range is proposed. In the low speed constant torque region, the optimized excitation current is used to improve the load capacity and minimize the copper loss. It has a faster response speed than the random combination strategy of excitation current and armature current and the control strategy of zero excitation current. In the constant power range, the objective function of copper loss is established, and the constraints are torque, current, voltage and speed. The optimized negative excitation current and d-axis current can not only obtain higher speed and reluctance torque, but also achieve the maximum ratio of torque to copper loss under a certain torque value, which can expand the speed range and improve the efficiency. Finally, a motor system experimental platform based on dSPACE1103 is built, and the feasibility and effectiveness of the proposed control strategy are verified by experiments. © 2022, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码：1654 / 1665
页数：11
相关论文
共 20 条
  • [1] Gu Hui, Wang Yu, Research on torque impulse balance control strategy of fault tolerant flux switching permanent magnetic motor under combined open and short circuit faults, Transactions of China Electrotechnical Society, 35, 9, pp. 1931-1944, (2020)
  • [2] Cheng Ming, Wen Honghui, Zeng Yu, Et al., Analysis of airgap field modulation behavior and torque component in electric machines, Transactions of China Electrotechnical Society, 35, 5, pp. 921-930, (2020)
  • [3] Yu Feng, Cheng Ming, Tian Zhujie, Et al., Active phase-deficient control of a nine-phase flux-switching permanent magnet machine, Transactions of China Electrotechnical Society, 34, 8, pp. 1626-1635, (2019)
  • [4] Cao Ruiwu, Su Enchao, Zhang Xue, Investigation of linear flux-switching permanent magnet motor with segmented secondary for rail transit, Transactions of China Electrotechnical Society, 35, 5, pp. 1001-1012, (2020)
  • [5] Zhang Yuan, Wang Yu, Xiao Wenyan, Et al., Optimal switching control strategy for torque impulse balance control of permanent magnet flux switching motor, Transactions of China Electrotechnical Society, 34, 7, pp. 1404-1412, (2019)
  • [6] Ullah W, Khan F, Sulaiman E, Et al., Torque characteristics of high torque density partitioned PM consequent pole flux switching machines with flux barriers, China Electrotechnical Society Transa- ctions on Electrical Machines and Systems, 4, 2, pp. 130-141, (2020)
  • [7] Ullah W, Khan F, Umair M., Design and optimization of segmented PM consequent pole hybrid excited flux switching machine for EV/HEV application, China Electrotechnical Society Transactions on Electrical Machines and Systems, 4, 3, pp. 206-214, (2020)
  • [8] Hua Wei, Cheng Ming, Zhang Gan, A novel hybrid excitation flux-switching motor for hybrid vehicles, IEEE Transactions on Magnetics, 45, 10, pp. 4728-4731, (2009)
  • [9] Zhao Jilong, Jing Mengdie, Sun Xiangdong, Et al., Unity power factor control of hybrid excited axial field flux-switching mermanent magnet machine, 20th International Conference on Electrical Machines and Systems (ICEMS), pp. 1-5, (2017)
  • [10] Pothi N, Zhu Ziqiang, Afinowi A A, Et al., Control strategy for hybrid-excited switched-flux permanent magnet machines, IET Electric Power Applications, 9, 9, pp. 612-619, (2015)
12