Comparative analysis of isothermal adsorption models for coals with water content under supercritical conditions

被引:0
|
作者
Han W. [1 ]
Li A. [1 ]
Fang Q. [1 ]
Asadullah M. [1 ]
机构
[1] School of Petroleum Engineering, China University of Petroleum (East China), Qingdao
来源
Meitan Xuebao/Journal of the China Coal Society | 2020年 / 45卷 / 12期
关键词
Adsorption models; Coal; Saturated adsorption capacity; Supercritical isothermal adsorption; Water content;
D O I
10.13225/j.cnki.jccs.2020.0292
中图分类号
学科分类号
摘要
The adsorption of methane in the water-bearing coal bed is mostly under supercritical conditions.To compare and analyze the applicability and accuracy of the classical adsorption models for coal with water and under supercritical conditions,the adsorption experiments of coalbed methane on coal samples with different water contents at different temperatures are carried out,and the Langmuir model,Dubinin-Radushkevich (D-R) model,Dubinin-Astakhov (D-A) model,also the modified Langmuir+k model,Dubinin-Radushkevich+k (D-R+k) model and Dubinin-Astakhov+k (D-A+k) model which take into account the dissolved gas and coals swell are used to fit the adsorption data of methane on coals with different water content,the fitting results are compared and analyzed,also the synergetil effect of water content and temperature on supercritical adsorption of methane on coal are discussed.The results show that the Langmuir model,the D-R model,and the D-A model deviate greatly from the measured results under medium and high pressure,and the root-mean-square error (ERMS) is between 0.01-0.06.However,the modified adsorption models which take into account factors such as dissolved gas and coals swell have higher fitting accuracy,and the D-A+k model is the most suitable model with minimal fitting errors and the highest accuracy for describing supercritical adsorption of methane on coals with water,and the ERMS is between 0.002-0.009.The saturated adsorption capacity of the coal decreases in varying degrees with the increase of water content at different temperatures,it tends to be a constant when the water content increases to a certain value,and it is decreased by 7.92% and 2.49% respectively when the water content is increased from 0 to 6% at 30℃ and 60℃.The saturated adsorption capacity of the coal with different water contents decreases in varying degrees with temperature increases,and it is decreased by 9.05%,4.61%,and 3.68% for coal with the water content of 0,2.5%,and 6% when the temperature is increased from 30℃ to 60℃.Therefore,the adsorption of methane on coal is influenced by both the temperature and water content.The saturated adsorption capacity of methane on coal decreases with increasing temperature and water content.The higher the temperature,the less the effect of water on the saturated adsorption capacity of methane on coal.The higher the water content,the less the effect of temperature on the saturated adsorption capacity of methane on coal. © 2020, Editorial Office of Journal of China Coal Society. All right reserved.
引用
收藏
页码:4095 / 4103
页数:8
相关论文
共 45 条
  • [1] ZHU Zhimin, YANG Chun, SHEN Bing, Et al., The definition and characteristics of coalbed methane and coalbed methane system, Xingjiang Petroleum Geology, 27, 6, pp. 763-765, (2006)
  • [2] LIU Jianzhong, SUN Haitao, LEI Yi, Et al., Current situation and development trend of coalbed methane development and utilization technology in coal mine area, Journal of China Coal Society, 45, 1, pp. 258-267, (2020)
  • [3] XU Yaobo, GUO Shengqiang, Technology and application of staged fracturing in coalbed methane horizontal well of soft and hard coal composite coal seam, Journal of China Coal Society, 44, 4, pp. 1169-1177, (2019)
  • [4] ZHU Qingzhong, YANG Yanhui, ZUO Yinqing, Et al., On the scientific exploitation of high-rank CBM resources, Natural Gas Industry, 40, 1, pp. 55-60, (2020)
  • [5] QING Y, WANG C, DING Q, Et al., Impact of surfactant in fracturing fluid on the adsorption-desorption processes of coalbed methane[J], Journal of Natural Gas Science and Engineering, 26, pp. 35-41, (2015)
  • [6] YORO K O, KAMOSA M, SEKOAI P T, Et al., Modelling and experimental investigation of effects of moisture and operating parameters during the adsorption of CO<sub>2</sub> onto polyaspartamide, International Journal of Coal Science & Technology, 6, 2, pp. 225-234, (2019)
  • [7] CHENG Y, JIANG H, ZHANG X, Et al., Effects of coal rank on physicochemical properties of coal and on methane adsorption[J], International Journal of Coal Science & Technology, 4, 2, pp. 129-146, (2017)
  • [8] ZHU Suyang, LI Chuanliang, DU Zhimin, Et al., Compound desorption model of coalbed methane, Journal of China University of Mining & Technology, 45, 2, pp. 316-324, (2016)
  • [9] WANG Fenglin, YUAN Yu, ZHANG Suian, Et al., Isothermal adsorption and desorption of coalbed methane under different water saturation and negative pressure, Coal Science and Technology, 47, 6, pp. 158-163, (2019)
  • [10] COPPENS L., L'adsorption du méthane par les houilles sous pression élevée[A].Annales des Mines de Belgique[C], 37, (1936)