ASSESSMENT OF SHS TUBULAR T JOINTS SUBJECTED TO CHORD AXIAL FORCES

被引：0
|
作者：
Correia, Tatiana P. [1 ]
de Lima, Luciano R. O. [2 ]
Rodrigues, Monique C. [2 ]
da S. Vellasco, Pedro C. G. [2 ]
da Silva, André T. [2 ]
机构：
[1] PGECIV – Civil Engineering Graduate Program, State University of Rio de Janeiro – UERJ, Brazil
[2] Structural Engineering Department, State University of Rio de Janeiro – UERJ, Brazil
来源：
ce/papers | 2019年 / 3卷 / 5-6期
关键词：
Analytical formulation - ANSYS software - Axial forces - Calibrated model - Cold-formed steel - Preload effect - Square hollow sections - Tubular T joints;
D O I：
10.1002/cepa.1196
中图分类号：
学科分类号：
摘要：
This paper aims to investigate the behaviour of T-type welded joints consisting of cold-formed steel square hollow sections (SHS), with β equal to 1.0, with and without sidewall plate reinforcement. A particular focus is on the preload effect in the chord, which is subjected to different levels of tension and compressive axial forces. For this purpose, a finite element numerical study was developed in ANSYS software, based on the development of calibrated models with experimental results. The results were compared with analytical formulations prescribed by standards and in the literature. © 2020 Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin.
引用
收藏
页码：213 / 222
相关论文
共 50 条
  • [1] Numerical assessment of stainless steel tubular T-joints subjected to brace and chord axial forces
    Nogueira, Mateus M.
    de Lima, Luciano R. O.
    da S. Vellasco, Pedro C. G.
    Young, Ben
    ce/papers, 2021, 4 (2-4): : 2495 - 2503
  • [2] Experimental and numerical assessment of RHS T-joints subjected to brace and chord axial forces
    Nizer, Adriano
    de Lima, Luciano R. O.
    Vellasco, Pedro C. G. da S.
    de Andrade, Sebastiao A. L.
    Goulart, Evandro da S.
    da Silva, Andre T.
    Neves, Luis F. da C.
    STEEL CONSTRUCTION-DESIGN AND RESEARCH, 2016, 9 (04): : 315 - 322
  • [3] Investigation of grouted stainless steel SHS tubular X- and T-joints subjected to axial compression
    Chen, Yu
    Feng, Ran
    Fu, Liqun
    ENGINEERING STRUCTURES, 2017, 150 : 318 - 333
  • [4] Static Strength of Tubular T-Joints with Reinforced Chord under Axial Compression
    Shao, Yong-Bo
    Lie, Seng-Tjhen
    Chiew, Sing-Ping
    ADVANCES IN STRUCTURAL ENGINEERING, 2010, 13 (02) : 369 - 377
  • [5] Axial tensile behavior and strength of welds for CHS branches to SHS chord joints
    Wang, Wei
    Gu, Qing
    Ma, Xinxu
    Wang, Junjie
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2015, 115 : 303 - 315
  • [6] Influence of chord stress on axial strength of rectangular tubular T- and TX-joints
    Zhu, L
    Shi, YJ
    Wang, YQ
    Chen, H
    PROCEEDINGS OF THE EIGHTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING FOR YOUNG EXPERTS, VOLS 1 AND 2, 2004, : 771 - 777
  • [7] Prediction of Static Strength of Tubular T and X Joints Subjected to Axial Compression
    Chen Tieyun
    China Ocean Engineering, 1994, (01) : 31 - 40
  • [8] Tests to Determine Stress Concentration Factors for Square Bird-Beak SHS Joints under Chord and Brace Axial Forces
    Cheng, Bin
    Qian, Qin
    Zhao, Xiao-Ling
    JOURNAL OF STRUCTURAL ENGINEERING, 2014, 140 (11)
  • [9] Experimental and numerical assessment of CHS-RHS T-joints with chords subjected to axial tensile forces
    Neto, Joao Batista da Silva
    Nunes, Gabriel Vieira
    Sarmanho, Arlene Maria Cunha
    Pereira, Daniel Jose Rocha
    Guerra, Messias Junio Lopes
    Alves, Vinicius Nicchio
    ADVANCES IN STRUCTURAL ENGINEERING, 2021, 24 (12) : 2593 - 2606
  • [10] ANALYSIS OF THE DYNAMIC MECHANISM OF SQUARE TUBULAR T-JOINTS WITH CHORD FLANGES SUBJECTED TO IMPACT LOADING
    Deng, Peng
    Chang, Dong-Song
    Chen, Xiu-Long
    Zhu, Zhong-Yi
    Asghar, Raheel
    ADVANCED STEEL CONSTRUCTION, 2024, 20 (01): : 21 - 29
12345