Formability of AZ31B Magnesium Alloy Sheet Under Different Die Temperatures

被引：0
|
作者：
Wang Z. [1 ]
Liu Q. [1 ]
Gu R. [1 ]
Wang W. [1 ]
Wei X. [1 ]
机构：
[1] School of Materials Science and Engineering, Shanghai University, Shanghai
来源：
Wang, Wurong (wrwang@shu.edu.cn) | 2018年 / Shanghai Jiaotong University卷 / 52期
关键词：
Die temperature; Finite element method; Forming limit curve (FLC); Magnesium alloy; Warm forming;
D O I：
10.16183/j.cnki.jsjtu.2018.09.013
中图分类号：
学科分类号：
摘要：
To investigate the effect of die temperature on formability of AZ31B magnesium alloy sheet in stamping, forming limit curve (FLC) of AZ31B magnesium alloy sheet was obtained through Nakazima semispherical drawing under different die temperatures. Thermo-mechanical coupling effect under heat transfer between AZ31B magnesium alloy sheet and die was analyzed based on temperature fields of biaxial tension specimens obtained by thermo-mechanical coupled simulation using finite element method. Effect of die temperature on forming limit of AZ31B alloy sheet in working condition was finally verified in a tryout stamping of hinge cover. The results show that temperature gradient distribution of AZ31B magnesium alloy is highly changed with the decline of die temperature, forming limit is thus decreased and fracture position is also affected. The FLCs under different die temperatures are proved to be in good agreement with actual stamping of AZ31B alloy sheet. © 2018, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码：1092 / 1097
页数：5
相关论文
共 12 条
  • [1] Gao S., Research on cold stamping process and performance of magnesium alloy sheets, (2014)
  • [2] Liu G., AZ31 magnesium alloy sheet high temperature forming limit diagram theory to obtain, (2013)
  • [3] Zhou G., Jain M.K., Wu P., Et al., Experiment and crystal plasticity analysis on plastic deformation of AZ31B Mg alloy sheet under intermediate temperatures: How deformation mechanisms evolve, International Journal of Plasticity, 79, 4, pp. 19-47, (2016)
  • [4] Li W., Research on the formability of AZ31B magnesium alloy sheet, (2012)
  • [5] Zhong M., Research of forming limit and spring-back of magnesium alloy sheet AZ31 at warm condition, (2012)
  • [6] Bruni C., Forcellese A., Gabrielli F., Et al., Effect of temperature, strain rate and fibre orientation on the plastic flow behaviour and formability of AZ31 magnesium alloy, Journal of Materials Processing Technology, 210, 10, pp. 1354-1363, (2010)
  • [7] Zhou G., Ananthaeswara K., Mitukiewicz G., Et al., FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet, Journal of Materials Processing Technology, 218, 4, pp. 12-22, (2015)
  • [8] Wang W.R., Huang L., Tao K.H., Et al., Formability and numerical simulation of AZ31B magnesium alloy sheet in warm stamping process, Materials & Design, 87, 12, pp. 835-844, (2015)
  • [9] Tari D.G., Worswick M.J., Elevated temperature constitutive behavior and simulation of warm forming of AZ31B, Journal of Materials Processing Technology, 221, 7, pp. 40-55, (2015)
  • [10] He Y., Magnesium alloys AZ31B sheet bulging test and the formability research, (2012)
12