Development of large thickness copper-stainless steel plate for nuclear fusion based on explosive welding technology

被引：0

作者：

Wang Y. ^{[1
]}

Li X. ^{[1
]}

Fan S. ^{[2
]}

Liu J. ^{[2
]}

机构：

[1] Department of Engineering Mechanics, Dalian University of Technology, Dalian

[2] Taiyuan Iron and Steel (Group) Co., Ltd., Composite Material Factory, Taiyuan

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2018年 / 39卷 / 12期

关键词：

Clad plate; Explosive welding; Nuclear fusion; Welding window;

D O I：

10.12073/j.hjxb.2018390302

中图分类号：

学科分类号：

摘要：

Large thickness copper-stainless steel clad plate is an important part for nuclear fusion reactor. In addition to the technical requirements of composite ratio, tensile strength, shear strength and interfacial wave shape are far higher than those of conventional clad plate. Many experiments are required to meet the technical requirements by conventional methods. To solve the technical problem and ensure the quality of explosive welding, the optimal process parameters and welding window can be determined based on the theory calculation. Results of the development of large thickness copper stainless steel clad plates with explosive welding showed that the combinations of theoretical analysis, numerical calculation and experiments could be acted as a standardized technical method for the production of explosive welding. © 2018, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.

引用

页码：77 / 81and104

共 6 条

[1] Wang Y., Li X., Research and development of CAE software for explosive welding, Engineering Blasting, 24, 1, pp. 1-7, (2018)
[2] Li X., Application of explosive welding window to thick metal plate, Explosive Materials, 25, 2, pp. 27-30, (1996)
[3] Wang H., Tong Z., Numerical simulation for explosive welding process of metal plate, Transactions of the China Welding Institution, 31, 9, pp. 101-108, (2010)
[4] Li X., Yang W., Xi J., Et al., The lower limit of explosive welding parameter window for bimetal, Explosive Materials, 28, 3, pp. 22-26, (1999)
[5] Zhao Z., Wang J., Hang Y., Et al., Research on explosive welding window of bimetal composite plate, Science Technology and Engineerin, 9, 5, pp. 1126-1130, (2009)
[6] Zhao C., Li X., Movement of flyer plate in difference method of characteristics curve under sliding detonation, Chinese Journal of Energetic Materials, 20, 1, pp. 57-61, (2012)

← 1 →