Design method and error analysis of thin plate butt welded joint specimen for ultrasonic fatigue test

被引：0
|
作者：
Wang Y. [1 ,2 ]
Wang D. [1 ]
Ding J. [3 ]
Deng C. [1 ]
Wu L. [1 ]
机构：
[1] School of Material Science and Engineering, Tianjin Key Laboratory of Advanced Joining Technology, Tianjin University, Tianjin
[2] Patent Examination Cooperation Tianjin Center of the Patent Office SIPO, Tianjin
[3] Tianjin Long March Launch Vehicle Manufacturing Co., Ltd, Tianjin
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2019年 / 40卷 / 01期
关键词：
Finite element; Relative error; Specimen design; Ultrasonic fatigue;
D O I：
10.12073/j.hjxb.2019400014
中图分类号：
学科分类号：
摘要：
The calculation formula of the resonance length of the dog-bone-shaped thin plate specimen with middle equal section for ultrasonic fatigue test was obtained by analytical solution, meanwhile the distribution functions of the displacement and stress amplitude along the resonance length were given. Considering weld reinforcement or not, finite element models of thin plate specimen and thin plate butt specimen were built respectively, and then modal results were analyzed. The results showed that the relative frequency error of the analytical method is less than 1%, while the frequency error caused by the weld reinforcement increased by about 1.7%. Moreover, the thin plate butt specimen of low-alloy steel Q345 was designed based on the above method, and then ultrasonic fatigue tests were conducted to verify the accuracy of the resonant frequency. © 2019, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码：71 / 74
页数：3
相关论文
共 7 条
  • [1] Wu L., Wang D., Wang S., Et al., Fatigue behavior of welded joints under combined cycle fatigue with ultrasonic component, Transactions of the China Welding Institution, 30, 5, pp. 9-12, (2009)
  • [2] Tao H., Progress of ultrasonic fatigue, Acta Aeronautica Et Astronautica Sinica, 19, 2, pp. 228-231, (1998)
  • [3] Wang Q.Y., Berard J.Y., Bathias C., Et al., High-cycle fatigue crack initiation and propagation behaviour of high-strength spring steel wires, Fatigue and Fracture of Engineering Materials and Structures, 22, 8, pp. 673-677, (1999)
  • [4] Wang Q., Accelerated fatigue testing by ultrasonic loading, Journal of Sichuan University, 34, 3, pp. 006-011, (2002)
  • [5] Xue H., The design of specimen for fatigue test at ultrasonic frequency, Acta Aeronautica Et Astronautica Sinica, 25, 4, pp. 425-428, (2004)
  • [6] Matikas T.E., Specimen design for fatigue testing at very high frequencies, Journal of Sound and Vibration, 247, pp. 673-681, (2001)
  • [7] Wang H., Analytical solution of the resonance length for ultrasonic torsional fatigue samples, Journal of South west Jiaotong University, 36, 6, pp. 595-598, (2001)
1