Cyclic loading test and consitutive model of postfire high strength Q690 steel

被引：0
|
作者：
Hu W.-Y. [1 ]
Yu Y.-J. [1 ]
Tian P.-F. [1 ]
Nie X.-Z. [1 ]
Ding F.-X. [1 ]
Yu Z.-W. [1 ]
机构：
[1] Department of Civil Engineering, Central South University, Changsha
来源：
Gongcheng Lixue/Engineering Mechanics | 2022年 / 39卷 / 03期
关键词：
Constitutive model; Cooling method; Cyclic loading test; Hysteretic behaviors; Monotonic tensile test; Q690; steel;
D O I：
10.6052/j.issn.1000-4750.2021.01.0024
中图分类号：
学科分类号：
摘要：
The structural steels will experience different levels of material degradation after high temperature heating and cooling processes in fire hazards. Available studies are primarily about the residual static properties of postfire steels. An experimental study was performed to investigate the residual static and seismic performance of high strength Q690 steel after high temperature fire exposure and the following cooling process. Different peak temperatures varying from 500 ℃~1000 ℃ and two cooling methods, namely natural cooling and water-cooling, were considered. Monotonic tensile tests and cyclic loading tests (with 4 different loading protocols) were performed on postfire Q690 steel specimens. Results indicate that postfire specimens with the experienced peak temperature being lower than 600 ℃ exhibit similar mechanical properties with intact specimens without any fire exposure. The normal Q690 steel has strain-hardening and cyclic-softening behaviors under cyclic loads. After experiencing the high temperature fire-heating (temperature higher than 600 ℃) and the following natural-cooling process, the postfire Q690 steel displays a decreased initial yield strength as the increase of peak temperature. While postfire specimens after water-cooling from high temperature (higher than 600 ℃) have increased initial yield strengths. Under cyclic loads, the postfire Q690 steel displays more significant strain-hardening and cyclic-hardening behaviors instead of the cyclic-softening characters in non-fire-exposure specimens. Cyclic constitutive models of postfire Q690 steel were calibrated based on experimental data, which can be used for residual seismic performance evaluations of Q690 steel structures after fire. Copyright ©2022 Engineering Mechanics. All rights reserved.
引用
收藏
页码：84 / 95
页数：11
相关论文
共 15 条
  • [1] Chen J, Ben Y, Brian U., Behavior of high strength structural steel at elevated temperatures, Journal of Structural Engineering, 132, 12, pp. 1948-1954, (2006)
  • [2] Feng Chengyuan, Li Guoqiang, Jiang Binhui, The influence of high-temperature material model of steel on the simulation of collapse of steel frame structure under fire, Engineering Mechanics, 36, 12, pp. 24-36, (2019)
  • [3] Wang W Y, Liu B, Kodur V., Effect of temperature on strength and elastic modulus of high-strength steel, Journal of Materials in Civil Engineering, 25, 2, pp. 174-182, (2015)
  • [4] Qiang Xuhong, Wu Nianduo, Jiang Xu, Luo Yongfeng, Mechanical properties of high strength steels S460 and S690 after fire, Journal of Harbin Institute of Technology, 49, 2, pp. 130-138, (2017)
  • [5] Qiang Xuhong, Wu Nianduo, Jiang Xu, Luo Yongfeng, Experimental study on post-fire mechanical properties of very high strength steel S960, Journal of Tongji University, 44, 7, pp. 1076-1083, (2016)
  • [6] Li G Q, Lyu H B, Zhang C., Post-fire mechanical properties of high strength Q690 structural steel, Journal of Constructional Steel Research, 132, pp. 108-116, (2017)
  • [7] Zhou H T, Wang W Y, Wang K., Mechanical properties deterioration of high strength steels after high temperature exposure, Construction and Building Materials, 199, pp. 664-675, (2019)
  • [8] Wang Weiyong, Zhang Yanhong, Li Xiang, Experimental study on mechanical properties of high strength Q960 steel after high temperature, Journal of Building Materials
  • [9] Yu Y J, Lan L F, Ding F X, Wang L P., Mechanical properties of hot-rolled and cold-formed steels after exposure to elevated temperature: A review, Construction and Building Materials, 213, pp. 360-376, (2019)
  • [10] Lu Jianfeng, Xu Ming, Wang Fei, Et al., Experimental study on high strength steel Q690GJ under monotonic and cyclic loading, Steel Construction, 31, 2, pp. 1-5, (2016)
12