Anti-detonation property of reinforcement rock

被引:0
|
作者
Xu G. [1 ]
Yuan W. [1 ]
Gu J. [2 ]
Zhang X. [2 ]
机构
[1] Engineering Design and Research Institute, The Air Force Academy, Beijing
[2] Engineer Protective Engineering Institute, Academy of Military Sciences PLA China, Luoyang, 471023, Henan
来源
关键词
Anchor cable; Anti-detonation property; Explosion cavity; Model test; Reinforcement;
D O I
10.11883/bzycj-2018-0203
中图分类号
学科分类号
摘要
To improve the anti-detonation property of surrounding rock, the surrounding rock reninforced by crossing cable method was proposed, and the effects of the method were analyzed by anology experiments and numerical simulation. The d pressure and strain distributions under detonation, explosion cavity dimensions and reinforcing cable parameters on strengthening effects were investigated. The results indicate that the detonation pressure peak value near the detonation center, radial strain peak value and circumferential strain peak value are all negative exponential decay with the proportional distance, no matter the rock is strengthened or not. Under the focus point explosion, the pressure and peak strain rapidly decrease with the distance apart from the detonation point. Under the concentrated charging case, the explosion cavity displays as a vase with the thin head part and fat bottom part. The explosion cavity of the magmatic body without strengthening is comparatively large. The influences of reinforced crossing cable angle on medium compression radius is limited. With the increase of the density of the reinforced crossing cable, the peak value of the compression wave in the strengthened medium decreases about 20%-35% and the destruction radius decreases about 30%. The results of this paper can provide references to the underground protective engineering design and enclosing rock strengthening. © 2019, Editorial Staff of EXPLOSION AND SHOCK WAVES. All right reserved.
引用
收藏
相关论文
共 13 条
  • [1] Anders A., Laboratory testing of a new type of energy absorbing rock bolt, Tunnelling and Underground Space Technology, 20, 4, pp. 291-300, (2005)
  • [2] Tannant D.D., Brummer R.K., Rock bolt behavior under dynamic loading field tests and modeling, International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 32, 6, pp. 537-550, (1995)
  • [3] Fang C., Zhuo J., Experimental study actuality of rock bolts reinforcement mechanism, Journal of Hohai University: Natural Science, 33, 6, pp. 696-700, (2005)
  • [4] Ortlepp W.D., Stacey T.R., Performance of tunnel support under large deformation static and dynamic loading, Tunnelling and Underground Space Technology, 13, 1, pp. 15-21, (1998)
  • [5] Yang Z., Gu J., Chen A., Et al., Model experiment study on influences of reinforcement on intervals of rock bolts in surrounding rock under explosive waves, Chinese Journal of Rock Mechanics and Engineering, 27, 4, pp. 757-764, (2008)
  • [6] Chen J., Sun J., Lin J., Et al., Failure of rock openings under intensive explosion stress wave, Journal of PLA University of Science and Technology, 8, 6, pp. 582-588, (2007)
  • [7] Yang S., Liang B., Gu J., Et al., Research on characteristics of prestress change of anchorage cable in anti-explosion model test of anchored cavern, Chinese Journal of Rock Mechanics and Engineering, 25, pp. 3749-3756, (2006)
  • [8] Wang G., Gu J., Chen A., Et al., Model test research on failure forms and failure mechanism of anchor bolts under top explosion, Chinese Journal of Rock Mechanics and Engineering, 31, 1, pp. 27-31, (2012)
  • [9] Xu J., Gu J., Chen A., Et al., Model test study of anti-explosion capacity of anchored tunnel with local lengthening anchors in arch springing, Chinese Journal of Rock Mechanics and Engineering, 31, 11, pp. 2182-2186, (2012)
  • [10] Xu G., Gu J., Yuan W., Et al., Model test study on explosive resistance of intercross bolted rock mass structure in underground space, Chinese Journal of underground space and Engineering, 10, 5, pp. 1078-1085, (2014)