Test and Analysis of High Frequency Magnetic Energy Losses Characteristics for Giant Magnetostrictive Materials

被引：0
|
作者：
Huang W. [1 ,2 ]
Gao C. [1 ,2 ]
Wang B. [1 ]
Weng L. [2 ]
Li Y. [1 ,2 ]
机构：
[1] State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin
[2] Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Hebei University of Technology, Tianjin
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2019年 / 50卷 / 02期
关键词：
Frequency; Giant magnetostrictive materials; Losses coefficients; Magnetic density; Magnetic energy losses;
D O I：
10.6041/j.issn.1000-1298.2019.02.048
中图分类号：
学科分类号：
摘要：
Experimental and calculating analysis of magnetic losses for giant magnetostrictive materials is necessary steps for the design of high power magnetostrictive transducer. In order to further research the magnetic energy losses characteristics, a Terfenol-D rod was sectioned along different directions, and these slices were made into several square annular sheet samples. The influences of magnetization direction and dimension parameter on the magnetic losses were compared and analyzed. Under different frequency and magnetic density of driving magnetic field, the magnetic energy losses were measured to analyze the variation trends of the losses. Based on the loss separation formula and measured data, the effects of eddy current skin effect and dynamic hysteresis characteristics were taken into consideration. The variation trends of the losses coefficients were investigated with numerical simulation. The results showed that the high frequency magnetic energy losses for Terfenol-D were increased rapidly in both value and growth rate with the increase of frequency and magnetic density. When the frequency was 5 kHz, the losses were increased from 2.742 W/kg to 153.890 W/kg as the flux density was varied from 0.01 T to 0.09 T. The losses were increased by 55.12 times. When the flux density was 0.05 T, the losses were increased from 8.138 W/kg to 319.428 W/kg as the frequency was increased from 1 kHz to 20 kHz. The losses were increased by 38.25 times. The losses coefficients varied with high frequency and magnetic density. When the frequency was above 5 kHz and the magnetic density was higher than 0.05 T, the average error of the model between the calculated value and the measured value was 3%. The numerical model was suitable for calculating high magnetic energy losses of Terfenol-D. It can provide a theoretical and experimental guidance for the high frequency applications of magnetostrictive materials. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：420 / 426
页数：6
相关论文
共 20 条
  • [1] Li L., Yan B., Zhang C., Influence of frequency on characteristic of loss and temperature in giant magnetostrictive actuator, Proceedings of the CSEE, 31, 18, pp. 124-129, (2011)
  • [2] Li S., Wang B., Zhou Y., Et al., Output displace of actuator based on Terfenol-D multilayered composite, Chinese Journal of Scientific Instrument, 30, 1, pp. 71-75, (2009)
  • [3] Zhu J.G., Ramsden V.S., Improved formulations for rotational core losses in rotating electrical machines, IEEE Transactions on Magnetics, 34, 4, pp. 2234-2242, (1998)
  • [4] Huang W., Song G., Sun Y., Et al., Numerical dynamic strong coupled model of linear magnetostrictive actuators, IEEE Transctions on Magnetics, 48, 2, pp. 391-394, (2012)
  • [5] Ju X., Lin M., Fan W., Et al., Structure analysis and output force characteristic study of giant magnetostrictive actuators, Chinese Journal of Scientific Instrument, 39, 5, pp. 1198-1206, (2017)
  • [6] Bertotti G., General properties of power losses in soft ferromagnetic materials, IEEE Transactions on Magnetics, 24, 1, pp. 621-630, (1988)
  • [7] Li Y., Zhu L., Zhu J., Core loss calculation based on finite-element method with Jiles-Atherton dynamic hysteresis model, IEEE Transactions on Magnetics, 54, 3, (2018)
  • [8] Zhang N., Li L., Wei X., Calculation method and experimental verification of core losses under non-sinusoidal excitation, Transactions of China Electrotechnical Society, 31, 17, pp. 224-232, (2016)
  • [9] Li J., Yang Q., Li Y., Et al., Improved calculation formula of core losses for laminated silicon steels at high frequency and high flux density, High Voltage Engineering, 42, 3, pp. 994-1002, (2016)
  • [10] Zhu Y., Li Y., A hysteresis nonlinear model of giant magnetostrictive transducer, Journal of Intelligent Material Systems and Structures, 26, 16, pp. 2242-2255, (2015)
12