Preparation and Properties of Polyacrylonitrile/IL Composite Piezoelectric Fibers

被引：0

作者：

Zhou R. ^{[1
]}

Fu G. ^{[1
]}

Xue R. ^{[1
]}

Shi Q. ^{[1
]}

Chen Y. ^{[2
]}

Tang S. ^{[1
]}

Teng Y. ^{[1
]}

机构：

[1] Beijing Key Lab of Special Elastomer Composite Materials, College of New Materials and Chemical Engineering, Beijing Institute of Petrochemical Technology, Beijing

[2] Zhejiang Collaborative Innovation Center for High Value Utilization of Byproducts from Ethylene Project, Ningbo Polytechnic, Ningbo

来源：

Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2022年 / 38卷 / 09期

关键词：

Composite fiber; Dielectric; Electrospinning; Ionic liquid; Piezoelectric; Polyacrylonitrile;

D O I：

10.16865/j.cnki.1000-7555.2022.0191

中图分类号：

学科分类号：

摘要：

In order to improve the piezoelectric properties of polyacrylonitrile (PAN) fiber membranes, ionic liquid 1- allyl- 3- butylimidazole tetrafluoroborate (IL) was doped into PAN, and PAN/IL composite nanofiber membranes were prepared by electrospinning technology. The surface morphology, conformation, piezoelectric properties dielectric properties, mechanical properties and sensor sensitivity of PAN/IL composite fiber membranes were characterized by scanning electron microscope, Fourier transform infrared spectroscopy, X- ray diffraction, broadband dielectric and impedance spectrometer, stretching machine, LCR tester and other methods. The research results show that with the addition of an appropriate amount of IL, the PAN/IL composite fiber membrane has a good morphology without beading, and the fiber arrangement has a certain orientation. Doping IL into PAN can increase the content of the planar zigzag conformation of the composite fiber membrane, and its value can reach up to 93.08%, which is beneficial to the improvement of the piezoelectric properties of the PAN composite fiber membranes. After adding ionic liquid (IL), the dielectric constant of the composite fiber membrane increases from 3.40 to 6.14, the dielectric loss decreases from 0.05 to 0.03, the stress can reach 4.27 MPa and the sensitivity of the prepared flexible sensor can reach 0.56 kPa-1. © 2022, Editorial Board of Polymer Materials Science & Engineering. All right reserved.

引用

页码：117 / 123

页数：6

共 20 条

[1] Zhao Y X, Chen Y J, Pang G X, Et al., Preparation and performance of novel Tb-PEG+Eu-PEG /PANI/PAN luminescent-electrical-phase change composite fibers by electrospinning, Chemical Journal of Chinese Universities, 40, 4, pp. 824-831, (2019)
[2] Gao Y, Liang Y R, Wen S P, Et al., Progress in applications of piezoelectric poly (vinylidene fluoride) nanofibers, Polymer Materials Science & Engineering, 32, 5, pp. 176-181, (2016)
[3] Liu Y, Xue Y, Ji H, Et al., Kinetics of the cyclization and isomerization reactions in polyacrylonitrile based carbon fiber precursors during thermal-oxidative stabilization, Journal of Applied Polymer Science, 137, pp. 48819-48829, (2019)
[4] Wu Q Y, Wan L S, Xu Z K., Structure and performance of polyacrylonitrile membranes prepared via thermally induced phase separation, Journal of Membrane Science, 409-410, pp. 355-364, (2012)
[5] Hobson R J, Windle A H., Crystalline structure of atactic poly (acrylonitrile), Macromolecules, 26, pp. 6903-6907, (1993)
[6] Martins P, Lopes A C, Lanceros-Mendez S., Electroactive phases of poly(vinylidene fluoride): determination, processing and applications, Progress in Polymer Science, 39, pp. 683-706, (2014)
[7] Minagawa M, Miyano K, Takahashi M., Infrared characteristic absorption bands of highly isotactic poly(acrylonitrile), Macromolecules, 21, pp. 2387-2391, (1988)
[8] Mahdavi V A, Yousefzadeh M, Kowsari E, Et al., Enhancement of β-phase crystalline structure and piezoelectric properties of flexible PVDF/ionic liquid surfactant composite nanofibers for potential application in sensing and self-powering, Macromolecular Materials and Engineering, 305, (2020)
[9] Mejri R, Dias J C, Hentati S B, Et al., Effect of anion type in the performance of ionic liquid/poly(vinylidene fluoride) electromechanical actuators, Journal of Non-Crystalline Solids, 453, pp. 8-15, (2016)
[10] Meira R M, Correia D M, Ribeiro S, Et al., Ionic-liquid-based electroactive polymer composites for muscle tissue engineering, ACS Applied Polymer Materials, 7, pp. 2649-2658, (2019)

← 1 2 →