Corrosion-wear behavior and synergy mechanism of Ti3AlC2-Al2O3/TiAl3 composite in molten aluminum

被引：0
|
作者：
Xiao H. [1 ]
Zhao S. [1 ]
机构：
[1] School of Mechanical Engineering, Guizhou University, Guiyang
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 10期
关键词：
Corrosion-wear; Molten Al; Synergy ratio; Ti[!sub]3[!/sub]AlC[!sub]2[!/sub]-Al[!sub]2[!/sub]O[!sub]3[!/sub]/TiAl[!sub]3[!/sub] composite;
D O I：
10.13801/j.cnki.fhclxb.20200111.003
中图分类号：
学科分类号：
摘要：
Through comparing and analyzing the materials loss characteristics under pure corrosion, pure wear and corrosion-wear conditions, the corrosion-wear behavior and synergy mechanism between corrosion and wear of Ti3AlC2-Al2O3/TiAl3 composite in molten aluminum were investigated. The results show that the loss of corrosion-wear of Ti3AlC2-Al2O3/TiAl3 composite is two orders of magnitude lower than that of H13 steel. With the increase of load and speed, the wear of Ti3AlC2-Al2O3/TiAl3 composite changes from abrasive wear to adhesive wear. The synergy ratio of corrosion-wear is less than 47.5% in the experiments. Under the condition of low load or low velocity, the Ti3AlC2-Al2O3/TiAl3 composite even exhibits negative synergy. This is partly due to no intermetallic compound formed in the interface, but just a little Ti dissolved into the molten aluminum when the Ti3AlC2-Al2O3/TiAl3 composite corroded in Al melt. On the other hand, the interpenetrating structure of TiAl3 matrix and Al2O3 reinforcement improves the wear resistance of Ti3AlC2-Al2O3/TiAl3 composite in molten aluminum. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：2501 / 2511
页数：10
相关论文
共 22 条
  • [1] ZHANG X M, CHEN W P., Review on corrosion-wear resistance performance of materials in molten aluminum and its alloys, Transactions of Nonferrous Metals Society of China, 25, 6, pp. 1715-1731, (2015)
  • [2] KIM H J, YOON B H, LEE C H., Sliding wear performance in molten Zn-Al bath of cobalt-based overlayers produced by plasma-transferred arc weld-surfacing[J], Wear, 254, 5-6, pp. 408-414, (2003)
  • [3] ZHU Y L, SCHWAM D, WALLACE J F., Et al., Evaluation of soldering, washout and thermal fatigue resistance of advanced metal materials for aluminum die-casting dies[J], Materials Science and Engineering: A, 379, 1, pp. 420-431, (2004)
  • [4] XU G P, WANG K, DONG X P, Et al., Multiscale corrosion-resistance mechanisms of novel ferrous alloys in dynamic aluminum melts, Corrosion Science, (2019)
  • [5] ZHANG X M, LI X, CHEN W P., Interfacial reactions of duplex stainless steels with molten aluminum[J], Surface and Interface Analysis, 47, 6, pp. 648-656, (2015)
  • [6] BALLOY D, TISSIER J C, GIORGI M L, Et al., Corrosion mechanisms of steel and cast iron by molten aluminum[J], Metallurgical & Materials Transactions A, 41, 9, pp. 2366-2376, (2010)
  • [7] JAMES G, WILLIAM L, PETERS K M., Development and application of refractory materials for molten aluminum applications, International Journal of Applied Ceramic Technology, 5, 3, pp. 265-277, (2008)
  • [8] CASTRO M N I, ROBLES J M A, HERNANDEZ D A C, Et al., Chemical interaction between Ba-celsian (BaAl<sub>2</sub>Si<sub>2</sub>O<sub>8</sub>) and molten aluminum, Ceramic International, 42, 2, pp. 3491-3496, (2016)
  • [9] CASTRO M N I, ROBLES J M A, HERNANDEZ D A C, Et al., Chemical interaction between SrAl<sub>2</sub>Si<sub>2</sub>O<sub>8</sub> and molten aluminum, Journal of the European Ceramic Society, 35, 15, pp. 4287-4292, (2015)
  • [10] ADABIFIROOZJAEI E, KOSHY P, SORRELL C C., Effects of V<sub>2</sub>O<sub>5</sub>, addition on the corrosion resistance of andalusite-based low-cement castables with molten Al-alloy, Journal of the European Ceramic Society, 32, 8, pp. 1463-1471, (2012)
123