Laser cladding modification technology for cast steel BD1 roller surface

被引：0
|
作者：
Gan, Wei [1 ,2 ]
Xu, Ke [1 ]
Liu, Tao [2 ]
Xu, Jin-Wu [1 ]
Jiao, Jian-Peng [2 ]
Zhou, Dong-Dong [1 ]
机构：
[1] University of Science and Technology Beijing, Beijing,100083, China
[2] Handan Iron and Steel Group Co., Ltd, Handan,056000, China
来源：
Surface Technology | 2020年 / 49卷 / 10期
关键词：
The work aims to solve the problem that the BD1 roller has low wear resistance and is easy to stick steel during the rail beam rolling process. The laser cladding technology was used to study the applicability of the cladding material; and the chemical composition was set to precipitate a large amount of carbides. At the same time; the wear resistance; cold and thermal fatigue resistance and welding performance were considered. The role of Cr; Ni; Mo; W; Si and B elements in laser cladding was studied by orthogonal experiment; the grain orientation was detected by metallographic method and the best powder chemical composition was determined by evaluation of 500× observation microcracks. Moreover; the macroscopic hardness and metallographic structure of cladding material were analyzed. Then; the effects of cladding process parameters such as laser power; linear velocity; overlap and powder feeding on the surface quality of BD1 roller were studied. After the laser cladding modification technology of the BD1 roller surface of the rail beam; a metallographic structure significantly different from the rolled material was formed on the surface of the cladding layer; so that the phenomenon of welding no longer occurred; and the phenomenon of sticking steel was eliminated. The cladding oxide film had high wear resistance and improved roller wear resistance. While the good metallurgical bonding ensured that the cladding layer had sufficient resistance to pressure; impact; mechanical fatigue and thermal fatigue. After laser cladding; the amount of steel could be increased from less than 1; 000 tons to more than 6; 000 tons. The surface material of BD1 roller is changed; the phenomenon of sticking steel is overcome; and the wear resistance is improved; which realizes high-efficiency recycling of BD1 roller and significantly improves the service life of the BD1 roller of the rail beam. © 2020; Chongqing Wujiu Periodicals Press. All rights reserved;
D O I：
10.16490/j.cnki.issn.1001-3660.2020.10.023
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：205 / 213
相关论文
共 50 条
  • [1] Material and technology research on surface of cast iron and cast steel by laser cladding
    Chu, X.
    Ma, Y.D.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2001, 17 (04):
  • [2] Laser surface modification of indefinite chilled cast-iron roller
    Chen, C. (chjchen2001@aliyun.com), 1600, Science Press (40):
  • [3] Surface modification of grey cast iron by laser cladding for automotive brake disc application
    Manoj, Abhinav
    Saurabh, Ashish
    Narala, Suresh Kumar Reddy
    Saravanan, Prabakaran
    Natu, Harshad Prabhakar
    Verma, Piyush Chandra
    WEAR, 2023, 532
  • [4] Microstructure Characteristic of Laser Cladding Ceramic Layer on High Cr Cast Steel Surface
    He, Yuanshan
    Li, Yishan
    Huang, Weiling
    Wang, Yong
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1542 - 1545
  • [5] Microstructure Characteristic of Laser Cladding Ceramic Layer on High Cr cast steel Surface
    Li, Yishan
    Han, Bin
    Gao, Cai
    ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 1866 - +
  • [6] Surface hardening of 70Mn2Mo cast steel hot roller by laser
    Xu, Qiao-Yu
    Yu, Qing
    Li, Zhu-Gang
    Liu, Xiang
    Jinshu Rechuli/Heat Treatment of Metals, 2002, 27 (08):
  • [7] Research on hardening the surface of laser and anti-tempering property of cast steel hot roller
    Xu Qiao-yu
    Ahmat, Klbinur
    Liu Xiang
    ADVANCES IN FRACTURE AND MATERIALS BEHAVIOR, PTS 1 AND 2, 2008, 33-37 : 1359 - 1363
  • [8] Study and application on laser consolidation treatment of a cast steel roller
    Jiang, Youqing
    Huang, Anguo
    Zhou, Longzao
    Xie, Mingli
    Liu, Jianhua
    Liang, Ming
    Xiao, Shanggong
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2006, 17 (16): : 1756 - 1759
  • [9] Study of laser cladding on die steel surface
    Chen, Daming
    Xu, Yourong
    Zhang, Henghua
    Jinshu Rechuli/Heat Treatment of Metals, (01): : 26 - 28
  • [10] THE STUDY ON THE APPLICABILITY OF LASER SURFACE MODIFICATION TECHNOLOGY TO IRRADIATED STAINLESS STEEL
    Sato, Masatoshi
    Kanno, Masanori
    Nakata, Kiyotomo
    Takahashi, Hidenori
    Sakamoto, Hiroshi
    ICONE16: PROCEEDING OF THE 16TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2008, VOL 1, 2008, : 533 - 538
12345