Two-body abrasive behavior of areca sheath fibre reinforced polyvinyl alcohol composites

被引:0
|
作者
Nayak, Subhakanta [1 ]
Mohanty, Jyotiranjan [1 ]
机构
[1] Department of Mechanical Engineering, Veer Surendra Sai University of Technology, Sambalpur,768 018, India
来源
关键词
Regression analysis - Abrasion - Polyvinyl chlorides - Reinforcement - Scanning electron microscopy - Tribology - Tensile strength - Injection molding - Wear resistance - Chlorine compounds - Polyvinyl alcohols;
D O I
暂无
中图分类号
学科分类号
摘要
Tribological properties of randomly oriented benzyl chloride modified short areca sheath (AS) fibre reinforced polyvinyl alcohol (PVA) composites have been studied. The test specimens are prepared using various weights of fibres (0, 10, 20, 30 and 40 %) by injection molding process. Fibre content of 27 wt% is found to have better tensile strength, as determined by regression analysis. The tribological behavior under multipass abrasion condition and the impacts of applied load and sliding distance on specific wear rate and weight loss have also been investigated. It is found that 27 wt% of fibre loading shows better resistance to wear similar to tensile strength. Scanning electron microscopy is used to capture the images of wear surface at optimum fibre loading to have an idea about the wear mechanism of the composite. © 2019, National Institute of Science Communication and Information Resources (NISCAIR). All rights reserved.
引用
收藏
页码:205 / 209
相关论文
共 50 条
  • [1] Two-body abrasive behavior of areca sheath fibre reinforced polyvinyl alcohol composites
    Nayak, Subhakanta
    Mohanty, Jyotiranjan
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2019, 44 (02) : 205 - 209
  • [2] Two-body abrasive wear behavior of woven basalt fabric reinforced epoxy and polyester composites
    Chairman, C. Anand
    Thirumaran, B.
    Babu, S. P. Kumaresh
    Ravichandran, M.
    MATERIALS RESEARCH EXPRESS, 2020, 7 (03)
  • [3] Polyvinyl Chloride Reinforced with Areca Sheath Fiber Composites-An Experimental Study
    Nayak, Subhakanta
    Mohanty, Jyoti Ranjan
    Samal, Priya Ranjan
    Nanda, Bijoy Kumar
    JOURNAL OF NATURAL FIBERS, 2020, 17 (06) : 781 - 792
  • [4] Two-body abrasive wear of Al-SiC composites
    Al-Rubaie, KS
    Yoshimura, HN
    de Mello, JDB
    WEAR, 1999, 233 : 444 - 454
  • [5] Study on morphology and mechanical behavior of areca leaf sheath reinforced epoxy composites
    Ashok, R. B.
    Srinivasa, C., V
    Basavaraju, B.
    ADVANCED COMPOSITES AND HYBRID MATERIALS, 2020, 3 (03) : 365 - 374
  • [6] Study on morphology and mechanical behavior of areca leaf sheath reinforced epoxy composites
    R. B. Ashok
    C. V. Srinivasa
    B. Basavaraju
    Advanced Composites and Hybrid Materials, 2020, 3 : 365 - 374
  • [7] Dynamic Vibrational Analysis on Areca Sheath fibre reinforced bio composites by Fast Fourier Analysis
    Chethan, M. R.
    Venkat, Parvatini Sri Naga
    Krishna, G. S. Gopala
    Chennakesava, R.
    Vijay, P.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 19330 - 19339
  • [8] Influence of graphite filler on two-body abrasive wear behaviour of carbon fabric reinforced epoxy composites
    Suresha, B.
    Ramesh, B. N.
    Subbaya, K. M.
    Kumar, B. N. Ravi
    Chandramohan, G.
    MATERIALS & DESIGN, 2010, 31 (04) : 1833 - 1841
  • [9] Two-body Abrasive Wear Behavior of Nano-clay Filled LDPE/EVA Composites
    Kumar, B. N. Ravi
    Venkataramareddy, M.
    Suresha, B.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (24) : 2999 - 3007
  • [10] Two-body and three-body abrasive wear behaviour of polyaryletherketone composites
    Harsha, AP
    Tewari, US
    POLYMER TESTING, 2003, 22 (04) : 403 - 418