Investigating mechanical strength of a natural fibre polymer composite using SiO2 nano-filler

被引：0

作者：

Jotiram G.A. ^{[1
]}

Palai B.K. ^{[2
]}

Bhattacharya S. ^{[3
]}

Aravinth S. ^{[4
]}

Gnanakumar G. ^{[5
]}

Subbiah R. ^{[6
]}

Chandrakasu M. ^{[7
]}

机构：

[1] Department of Mechanical Engineering, D. Y. Patil College of Engineering and Technology, Maharashtra, Kolhapur

[2] Department of Mechanical Engineering, School of Engineering and Technology, GIET University, Odisha, Gunupur

[3] Research Scholar, Department of Textile Technology, Maulana Abul Kalam Azad University of Technology, West Bengal, Howrah

[4] Department of Mechanical Engineering, Rajalakshmi Institute of Technology, Kuthampakkam,Chennai, 600124, Tamilnadu

[5] Department of Mechanical Engineering, Panimalar Institute of Technology, Poonamallee, Tamilnadu, Chennai

[6] Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Telangana, Hyderabad

[7] Department of Civil Engineering, Road and Transportation Engineering, College of Engineering & Technology, Wollega University

来源：

Materials Today: Proceedings | 2022年 / 56卷

关键词：

Epoxy composite; Kenaf fibre; Mechanical strength; Nano-filler; Natural fibre;

D O I：

10.1016/j.matpr.2022.01.176

中图分类号：

学科分类号：

摘要：

Introducing nano-fillers in natural fibre polymer composite materials have attained a greater attention in recent days due to their distinct behavior in improving the mechanical characteristics of the composites with less effort. In this study, the effect of introducing nano-SiO2 filler in kenaf fibre polymer composite on their mechanical characteristics is analyzed. The nano-fillers with five different mass fractions namely 0%, 1%, 2%, 3%, and 4% were tested in this work. The tensile, compressive and impact strengths of the composites were investigated. The results evidenced that the increment in nano-filler content proportionally improved the strength of the composite until the addition of 2% of nanofiller and then, the improvement was not impressive. The maximum enhancement of 20.61% in tensile strength, 23.71% in compressive strength, and 22.88% in impact strength was attained with 2% fraction of nanofiller in composite. © 2022

引用

页码：1522 / 1526

页数：4

共 50 条

[1] The effect of (TiO2 and SiO2) nano-filler on solid polymer electrolyte based LiBOB
Sabrina, Q.
Sohib, A.
Lestariningsih, T.
Ratri, C. R.
INTERNATIONAL SYMPOSIUM ON FRONTIER OF APPLIED PHYSICS, 2018, 2019, 1191
[2] The effect of SiO2 nano-filler on dielectric properties of epoxy resin
Kudelcik, Jozef
Jahoda, Emil
Kurimsky, Juraj
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2019, 85 (01):
[3] Micro-composite strength and nano-filler effects
Subawi, Handoko
JOURNAL OF COMPOSITE MATERIALS, 2008, 42 (06) : 603 - 629
[4] Experimental Investigation of High Filler Loading of SiO2 on the Mechanical and Dynamic Mechanical Analysis of Natural PALF fibre-Based Hybrid Composite
Velmurugan G
Siva Shankar V
Kalil Rahiman M
Elil Raja D
Nagaraj M
Nagalakshmi T J
Silicon, 2023, 15 : 5587 - 5602
[5] Experimental Investigation of High Filler Loading of SiO2 on the Mechanical and Dynamic Mechanical Analysis of Natural PALF fibre-Based Hybrid Composite
Velmurugan, V.
Shankar, Siva, V
Rahiman, Kalil M.
Raja, Elil D.
Nagaraj, M.
Nagalakshmi, T. J.
SILICON, 2023, 15 (13) : 5587 - 5602
[6] Investigating mechanical strength of luffa and pineapple fibre reinforced polymer composite
Brucely Y.
Manas Ranjan Sahoo
Halder S.
Thiyagu M.
Sathish Kumar A.
Parida L.
Materials Today: Proceedings, 2022, 69 : 1300 - 1303
[7] Adhesive joining of copper using nano-filler composite adhesive
Ghosh, P. K.
Patel, Avantak
Kumar, Kaushal
POLYMER, 2016, 87 : 159 - 169
[8] Study on influence of nano-filler content on the performance of natural fibre reinforced epoxy composites
Mohan Gift M.D.
Raghuram K.S.
Suryanarayana Raju J.N.S.
Ravi D.
Venkata Rao M.
Subbiah R.
Chandrakasu M.
Materials Today: Proceedings, 2022, 56 : 1562 - 1566
[9] Performance of Silicone Rubber Composites with SiO2 Micro/Nano-filler under AC Corona Discharge
Nazir, M. Tariq
Phung, B. T.
Hoffman, Mark
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2016, 23 (05) : 2804 - 2815
[10] Effect of the nano-filler content on the compressive strength of continuous carbon fibre/epoxy matrix composites
Mechin, P-Y
Keryvin, V
Grandidier, J-C
COMPOSITES PART B-ENGINEERING, 2021, 224 (224)

← 1 2 3 4 5 →