Electric Drive Hydraulic Power Source Characteristics of Small Hydraulic Excavator

被引:0
|
作者
Liu B. [1 ]
Yan Z. [2 ]
Ge L. [3 ]
Quan L. [3 ]
机构
[1] Engineering Training Center, Taiyuan Institute of Technology, Taiyuan
[2] Mechanics Institute, Jinzhong University, Jinzhong
[3] Key Laboratory of Advanced Transducers and Intelligent Control System, Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan
关键词
Dynamic characteristics; Electric drive hydraulic power source; Hydraulic excavator; Variable speed and variable displacement;
D O I
10.6041/j.issn.1000-1298.2019.11.044
中图分类号
学科分类号
摘要
Hydraulic excavator driven by an internal-combustion engine is widely used in the construction field. As engine often works in inefficient area, some problems, such as high pollutant emissions, noise and low efficiency exist universally. In order to improve energy efficiency and reduce the emissions, applying hydraulic power source driven by electric motor to hydraulic excavator has become an important research direction. A power source was presented with variable speed induction motor to drive variable displacement pump, which used the fast response characteristic of variable displacement pump to make up for the slow dynamic response of variable speed induction motor, and it was applied to excavator. In order to fully understand the characteristics of the designed electro-hydraulic power source and provide a reference for electric hydraulic excavator design, the dynamic, static and disturbance characteristics of electro-hydraulic power source were studied from both the perspectives of theory and experiment. Then, load disturbance test and arm lifting test were completed on the test rig under the same working conditions. Compared with the characteristics of traditional engine used to drive hydraulic power source system, the new variable speed-variable displacement power source reduced the rotation speed fluctuation by 23.5% in the load disturbance test, the rising time of pump output pressure and flow was reduced by 14.9% and 26.3% in the arm lifting process. The new electro-hydraulic power source owed better characteristics. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码:387 / 393
页数:6
相关论文
共 23 条
  • [1] Quan L., Gao Y., Cheng H., Technology to improve the energy efficiency for construction machinery: state of the art, Chinese Hydraulics &Pneumatics, 4, pp. 1-9, (2013)
  • [2] Choi J., Kim H., Yu S., Et al., Development of integrated controller for a compound hybrid excavator, Journal of Mechanical Science and Technology, 25, 6, pp. 1557-1563, (2011)
  • [3] Debdatta D., Puja C., Truong B.N.M., Et al., A novel energy recuperation system for hybrid excavator using hybrid actuator, 15th International Conference on Control, Automation and Systems, pp. 1930-1935, (2015)
  • [4] Yu Y., Debdatta D., Truong B.N.M., Et al., A study on the energy regeneration system of boom for hybrid hydraulic excavator, 15th International Conference on Control, Automation and Systems, pp. 1910-1914, (2015)
  • [5] Jong I.Y., Ahn K.K., Dinh Q.T., A study on an energy saving electro-hydraulic excavator, ICROS-SICE International Joint Conference, pp. 3825-3830, (2009)
  • [6] Lin T., Wang Q., Hu B., Et al., Research on the energy regeneration systems for hybrid hydraulic excavators, Automation in Construction, 19, 8, pp. 1016-1026, (2010)
  • [7] Xiao Q., Wang Q., Zhang Y., Control strategies of power system in hybrid hydraulic excavator, Automation in Construction, 17, pp. 361-367, (2008)
  • [8] Huang W., Zhang X., Quan L., Et al., Velocity and position combined control of hydraulic swing system with large inertia, Transactions of the Chinese Society for Agricultural Machinery, 49, 10, pp. 410-417, (2018)
  • [9] Kwon T., Lee S., Sul S., Et al., Power control algorithm for hybrid excavator with supercapacitor, IEEE Transactions on Industry Application, 46, 4, pp. 1447-1455, (2010)
  • [10] Cegnar E.J., Hess H.L., Johnson B.K., A purely ultracapacitor energy storage system hybrid electric vehicles utilizing a based DC-DC boost converter, Proc. IEEE Appl. Power Electron. Conf. Expo, pp. 1160-1164, (2004)