Investigation on the static fracture mechanical characteristics of marble subjected to impact damage based on the FDM-DEM coupled simulation

被引：0

作者：

Zhang T. ^{[1
]}

Yu L. ^{[1
]}

Su H. ^{[1
]}

Luo N. ^{[1
]}

Wei J. ^{[2
]}

机构：

[1] State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou

[2] College of Geology and Environment, Xi'an University of Science and Technology, Xi'an

来源：

Baozha Yu Chongji/Explosion and Shock Waves | 2022年 / 42卷 / 01期

关键词：

Cyclic impact; FDM-DEM coupling; Fracture toughness; Rock mechanics; SHPB;

D O I：

10.11883/bzycj-2021-0089

中图分类号：

学科分类号：

摘要：

To investigate the mechanical characteristics of static fracture of marble subjected to dynamic damage after cyclic impacts, based on the modeling technology of the finite difference method (FDM) and the discrete element method (DEM) coupling, a three-dimensional numerical model of the split Hopkinson pressure bar (SHPB) was constructed, and the bar system and rock sample were modeled using FLAC3D and PFC3D programs, respectively. The numerical cyclic impact loading tests were carried out on notched semi-circular bend (NSCB) samples at a constant impact velocity, and then the static three-point bending fracture tests were simulated on these damaged samples. The coordinate data of the particles on fracture surfaces of the sample were extracted by compiling the Fish program, and then the fracture surface was reconstructed and the surface roughness was calculated quantitatively. The rationality and reliability of the numerical analysis were verified by comparison with the results of relevant laboratory tests. The results show that in the cyclic impact loading test, the stress-strain curve rebounds, resulting from the release of part of the stored strain energy during the unloading period. With the increase of the impact number n, the numbers of cracks and fragments generated increase. The connected force field becomes more and more chaotic and the number of broken force chains displays an increasing trend. The breakage of the force chains is the root cause of the deterioration of mechanical properties of the sample. The static fracture toughness of the sample after 5 times of impact is 53.35% lower than that of the natural sample, while the failure displacement increases. In the static loading process, more and more cracks and fragments generate as n increases. This is proof that the internal structure of the sample has been damaged in the cyclic impacts. The fracture surface roughness increases as the impact number increases. The research conclusions can provide certain guidance for the engineering practice. © 2022, Editorial Staff of EXPLOSION AND SHOCK WAVES. All right reserved.

引用

共 27 条

[1] HE M C, XIE H P, PENG S P, Et al., Study on rock mechanics in deep mining engineering, Chinese Journal of Rock Mechanics and Engineering, 24, 16, pp. 2803-2813, (2005)
[2] QIAN Q H., Challenges faced by underground projects construction safety and countermeasures, Chinese Journal of Rock Mechanics and Engineering, 31, 10, pp. 1945-1956, (2012)
[3] LIU D, LU W B, CHEN M, Et al., Attenuation formula of the dominant frequency of blasting vibration during tunnel excavation, Chinese Journal of Rock Mechanics and Engineering, 37, 9, pp. 2015-2026, (2018)
[4] SHAN R L, SONG L W, BAI Y, Et al., Model test studies of damage evaluation of frozen rock wall under blasting loads, Chinese Journal of Rock Mechanics and Engineering, 33, 10, pp. 1945-1952, (2014)
[5] LIU L, LU W B, CHEN M, Et al., Statistic damage threshold of critical broken rock mass under blasting load, Chinese Journal of Rock Mechanics and Engineering, 35, 6, pp. 1133-1140, (2016)
[6] YAN C B., Analysis of cumulative damage effect of rock mass blasting based on acoustic frequency spectrum characters, Rock and Soil Mechanics, 38, 9, pp. 2721-2727, (2017)
[7] XIONG J J, SHENOI R A., A two-stage theory on fatigue damage and life prediction of composites, Composites Science and Technology, 64, 9, pp. 1331-1343, (2004)
[8] JIN J F, LI X B, WANG G S, Et al., Failure modes and mechanisms of sandstone under cyclic impact loadings, Journal of Central South University (Science and Technology), 43, 4, pp. 1453-1461, (2012)
[9] JIN J F, LI X B, YIN Z Q, Et al., Effects of axial compression and confining pressure on energy dissipation of sandstone under cyclic impact loads, Rock and Soil Mechanics, 34, 11, pp. 3096-3102, (2013)
[10] WANG Z L, TIAN N C, WANG J G, Et al., Experimental study on damage mechanical characteristics of heat-treated granite under repeated impact, Journal of Materials in Civil Engineering, 30, 11, (2018)

← 1 2 3 →